CONTINENTAL OIL AND GAS LIMITED AND CONOIL PRODUCING LIMITED
TENDER OPPORTUNITIES FOR THE PROVISION OF EXPLORATION SERVICES IN OML 150 AND 153 SWAMP AND SHALLOW OFFSHORE OPERATIONS
DEADLINE: 10TH DECEMBER, 2020
1.0 INTRODUCTION
Continental Oil and Gas Limited and Conoil Producing Limited under Production Sharing Contract (PSC) with NNPC hereby invites interested and competent registered Nigerian Companies (DPR licensed and NCDMB registered) with suitable equipment and relevant proven experience to respond via NipeX NJQS portal to the tender opportunities listed in item 2 below for OML 150 and 153
Companies already registered and pre-qualified on the NipeX portal for various services and having the relevant codes for the tender opportunity will automatically be included in the bid list and do not need to re-apply The proposed contract will commence in Q2, 2021 and remain active for one year
primary duration, followed by one-year extension option
2.0 SERVICE REQUIREMENTS/SCOPE OF WORK
1. PROVISION OF WIRE LINE SERVICES (CONOG-EXPL/NAP-Q1/NIP-Q1) CAT 30424
Supply and provision of wire line logging equipment, consumables/spare parts and other related equipment and personnel Accurate acquisition, recording and computation of down hole measurements, and furnishing the data acquired as quickly as possible Unions agreed otherwise beforehand, each logging run will have its own cable tension recording On each first entry of a hole section, provision of an accurate depth record for the well/section, This includes recording both depth-wheel dopth, as well as magnetic or other marker depth. and reconciling both An accurate concise record of this reconciliation should be provided on the print (mentioning cable identification, procedure used for depth control relevant details, and corrections made).Provision of the acquired data on CD-ROMs, tapes, floppy discs, picture files, and prints, and quality assessment documents/data, as required. Curves, sensitivities and scales, including
depth scales.digital data carriers and formats shall be as specified.
2. PROVISION OF MUD-LOGGING SERVICES (CONOG-EXPL/NAP-Q1/NP-Q2) CAT 3.04.07
Perform mud logging, pressure predictor, pit volume and gas monitoring services with all terms of equipment and ancillary and optional equipment as required in accordance with the well specification, Provision of competent and experienced crew to perform mud logging services DD/MWD/LWD equipment Well plan/ring services. Consumables/ spare parts; and other related equipment and personnel
3. PROVISION OF MWD/LwD SERVICES (CONOG-EXPL/NAP-Q1/NP-Q3) CAT 304.08
State-of-the-art MWD (probe and collar MWD) systems including Gamma Ray. Direction and Inclination services deployable in both benign and tough drilling applications including HPHT with modern software for trajectory plotting and MWD turvey corrections accurate measurement systems for downhole annular drilling pressures as well as monitoring of downhole lateral, axial and torsional vibrations Formation Evaluation While Drilling (FEWD) services to include Attenuation Phase Shift Resistivity, Neutron Porosity, Bulk Density and Sonic
measurements tor various hale sires down to slim hole applications. Third generation or latest version of Rotary Steerable systems (including both Push-the-Bit and Point the-Bit systems) and Geo-steering systems deployable across various hole sizes Seismic While Drilling systems. Gyro
While drilling systems, Competent and adequately experienced MWD and FEWD Engineers with up to date knowledge of relevant state of the art software to support modern directional drilling and integrated measurement/evaluation systems, Demobilization and site clean-up
4. PROVISION OF GEO TECHNICAL SERVICES (CONOG-EXPL/NAP-Q1/NIP-Q4) CAT 3.09.03
Supply and provision of geotechnical equipment; consumables/spare parts; and other related equipment and personnel. Accurate acquisition, recording and computation of measurements, and furnishing the data acquired as quickly as possible. Unless agreed otherwise beforehand. Diagina pits of about 100m for soil investigation. Analysis of the sampled core in a standard laboratory leading to an assessment of a rig leg penetration
5 PROVISION OF GEOPHYSICAL AND HYDROGRAPHIC STE SURVEY SERVICES(CONOG-EXPL/NAP-Q1/NIP-Q5) CAT 80904
Supply and provision of Geophysical equipment; consumables/ spare parts: and other related equipment and personnel Accurate acquisition, recording and computation of measurements, and furnishing the data acquired as quickly as possible. Unless agreed otherwise beforehand. Side scan sonar, magnetic and bathymetric surveys and analysis Bathymetric surveys and analysis.
Charts construction to show best approach route to proposed rig location
6 PROVISION OF 2D/30/4D SEISMIC DATA SERVICES (CONOG-EXPL/NAP-Q1/NIP-Q6) CAT 3.10.0/310.02
Image Boundary: The coordinates defining the fully migrated area from CONOIL-CONOG Company. The coverage of image boundary map in 500Sqkm Full fold boundary
The preferred target depthis 4500m the maximum dio of the target layer is 30 degree. According to these parameters we calculate the full told boundary of the seismic project. The coverage of the full fold boundary should be in Sqkm
GEOMETRY PROPOSED: Swath Orthogonal, Basic Geometry: No of RL/Swath No. of Channels/RL” No. of Shots/Swath (cross split spread) SL=RL=500m, Source line layout: Orthogonal. Swath rolit: Total No of distance from RL to other in a swath (m) Full Fold coverage Swath Total Cross line”5wath Total in a Full Fold (Sq Km). Full fold coverage area: Sqkm (after design), Survey statistics: RL Total RL KLM, SL Total SL Km. Total shots Cumulative Total No. of shots of Nominal coverage area (5005qKm). Survey lines cut (SL+RL): in km Shot
density: No. of Shot in Sq.km/sq.km Azimuth. Source and Receiver layout map and Full fold coverage plot map
7. PROVISION OF DIRECTIONAL SURVEY SERVICES (CONOG-EXPL/NAP-Q1/NIP-Q7) CAT304.25
State-of-the-art Directional surveying systems. Well planning services Accurate measurement systems For downhole annular drilling pressures as well as monitoring of downhole lateral, axial and torsional vibrations. Third generation or latest version of Rotary steerable Systems (including both Push-the-st and Paint-the-Bit systems) and Geo-steering systems deployable across various hole sizes Competent and adequately experienced DD Engineers with up to date knowledge of relevant state-of-the-art software to support modern directional drilling and integrated measurement/evaluation systems Demobilization and site clean-up
8 PROVISION OF SUBSURFACE CONSULTANCY (GEOLOGICAL. GEOPHYSICAL RESERVOIR) SERVICES (CONOG-EXPL/NAP-Q1/NIP-Q8) CAT 302 22
In particular, the chosen consultant shall be required by the Company to perform the following services when the need arises. Build, maintain and update geological models Conduct high quality geological services related to well site operation and monitoring. QA/OC of 20/3D Seismic acquisition and processing projects. Participate in data rooms for our M&A activities and have the
ability to generate fast and accurate data room assessments. Supporting the Subsurface Team in the analysis and interpretation of a wide range of data, This will include, among others, geophysical, geological, petrophysical, reservoir, production, drilling and economic data. Quality check dynamic models built in-house with a view to increasing the confidence level of forecast generated from theso models Prospect identification, generation and maturation through
seismic data interpretation. Assisting in fluid and reservoir characterization Reviewing wells planned at subsurface level using models, quality check drilling and completion programs review early life data acquisition and surveillance plans Auditing and classifying CONOIL-CONOG’s Reserves Reviewing Drill Stem Test, Pressure Transient Test/Design and Interference Test/design Programs. Reviewing field development plans and giving expert advice
3.0 MANDATORY REQUIREMENTS
1. To be eligible for this tender exercise, interested companies are required to be pre-qualified in the relevant Product/Services categories of Nipex Joint Qualification System (NJQS) database as indicated to Technical Tender above (ITT) successfully prequalified suppliers in this category will receive invitation
2. To determine if you are pre-qualified and view the product/service category you are listed for Open https://vendors.nipex-ng.com and access NJQS with your log in details Click on Products/Services Status tab to view your status and product codes
3. If You are not listed in a product/service category and you are registered with the Department of Petroleum Resources (DPR) to do business, contact the NipeX office at 8, Bayo Kuku Street, lkoyi, Lagos with your DPR certificate as evidence for verification and necessary update.
4. To initiate the JQS pre-qualification process. access www.niper-ng.com.click on services tab followed by NJQS registration
5. To be eligible, al tenders must comply with the Nigerian Content requirements in the Nipex
4.0 NIGERIAN CONTENT DEVELOPMENT:
CONOG and CONOIL as indigenous Exploration and Production Companies in Nigeria, are committed to the development of the capabilities of Nigerian companies in compliance with the provisions of the Nigerian Oil and Gas Industry Content Development (NOGICD) Act 2010.
Tenderers are to note that they will be requested in the technical tender to provide details of their relevant strategy to ensure that they fully comply with the NOGICD Act. 2010 as provided at
http://www.ncdmb.gov.ng/images/GUIDELINES/NCACT.pdf.
Non-compliance will constitute a fatal flaw in all contract evaluations
in light of the above, tenderers shall be expected by the Nigerian Content Development Monitoring Board (NCDMB) to:
-Provide a detailed and signed Nigerian Content Execution Plan describing how the tenderer intends to comply with the Nigerian content requirements of the role, scope of work, and responsibilities of all Nigerian companies and personnel that would be involved in executing the work
-Demonstrate that the bidding entity is a Nigerian registered Company or indigenous Company with the provision of the following: 1. CAC registration Form (CO2 & Co7), 2. Evidence of registration with NCDMB NOGIC JQS.
-Demonstrate in-country capability by providing a detailed description of the location of in country committed facilities and infrastructure (assets, technical office, and administrative space, storage, workshop, assembly area, laboratory in Nigeria, and evidence of a registered office address in Nigeria with a physical addresses (not P.O. Box)
-Propose to deploy and utilize for the servicea nominated Nigerian-owned drilling rig (by owning or providing a binding agreement for a rig owned by a Nigerian third party)
-Demonstrate that in the case of a rig provider, it meets the following
a) A Nigerian company that has demonstrated Nigerian-equity ownership in a land/swamp rig) is the bidding entity or is participating as a partner in the binding entity supported by an executed binding agreement in the case of a joint bid. Including submission of documented plan by the bidding entity (i.e. with cash flow analysis approved by a reputable Nigerian lending institution/bank) demonstrating at start of contract planned acquisition of 1C% Nigerian equity ownership of the nominated drilling rig to be employed and utilized for the
service and increasing to 50% Nigerian equity within the duration of the contract when successful as preferred bidder and/or
b) Provide evidence of Nigerian partner (supported by an executed binding agreement) owning significant marine assets to support land, swamp or offshore drilling operations
-Provide corporate organizational and project/contract specific organogram with names and nationality of all personnel demonstrating compliance in 55% targets for Nigerian manning of key positions on the rig. nlus significant utilization of in-country support services in the operations of rig while on contract
-In line with the Nigerian Content Development Human Capacity Development Initiative, tenderers shall commit to providing project-specific training, man-hours, budget, skill development and understudy plan for Nigerian personnel utilizing OGTAN registered trainer(s) or other approved NCDMB training institutions)
-Tenderers shall submit a procurement plan on how they will give first consideration to all consumables that can be sourced in-country from Nigerian subcontractors from whom such are procured from, with evidence of binding agreements. A list with the main goods,
materials or consumables that are planned to be used in the contract. This list should differentiate consumables, goods, products, tools and equipment to be procured and used in the execution of the services within and outside Nigeria.
-Evidence of Registration on the NCDMB NOGIC JQS Portal
Please note that failure to provide any of the above requirement (or applicable documents) will be a fatal flaw
5.0 CLOSING DATE:
CONOG-CONOIL shall download Bidders List from NIPEX PORTAL for Companies who are pre-qualified and LIVE in relevant NJQS Product/Services Codes indicated in 20 above as at 15:00 hours on 10th of December 2020, being the advert closing date.
-Thereafter. a competitive bidding process shall be adopted. Invitation To Tender (ITT) shall be issued for both Technical and Commercial tenders to the approved bidders. Bidders shall upload bid documents (technical and commercial) on Nipex portal.
6.0 ADDITIONAL INFORMATION:
1. All costs incurred in preparing and processing NJQS prequalification and responding to this tender opportunity shall be to the contractor’s own account.
2. This “Invitation To Tender shall neither be construed as any form of commitment on the part of CONOG-CONOIL to award any contract to any contractor and or associated contractors, sub-contractors or agents. nor shall it entitle Pre-qualified Contractors to make any claims whatsoever, and/or seek any indemnity from CONOG-CONOIL and/or any of its partners by virtue of such Contractors having been pre-qualified in NJQS.
3. The tendering process shall be undertaken in accordance with the NNPC contracting process in compliance with Public Procurement Act 2007
4. CONOG-CONOIL will communicate only with authorized officers of the qualifying Companies at each stage of the Tender process, as necessary. and will NOT communicate through individuals or appointed Agents
5. This tender and any related process neither creates any commitment by CONOG-CONOIL nor establish any legal relationship.
6. All information must be provided in English Language
7. Notwithstanding the pre-qualification in NJos, cONOG-cONOIL is neither committed nor obliged to include your company on any bid list or to award any form of contract to your company and/or associated companies, sub-contractors or agents.
8. CONOG-CONOIL will not enter any form of communication with interested bidder(s) from the commencement date of this “Invitation To tender”
9. willful submission of any fictitious document will attract suspension from participation in future bids
10. Only pre-qualified companies in the appropriate supplier Categorization shall be invited for tendering
11. CONOG-CONOIL is not obliged to give any contract to the lowest bidder or any bidder. It is the sole discretion of NNPC/CONOG-CONOIL to make a decision on award of contract.
12. CONOG-cONOIL will not enter correspondence with any company or individual on why a company was short-listed or not short-listed.
Please visit NipeX portal at www.nipex-ng.com for this advert and other information and note that this tender will be processed through NipeX system.
