DEADLINE: 30TH NOVEMBER,2021
SHELL PETROLEUM DEVELOPMENT COMPANY OF NIGERIA LIMITED (SPDC)
OPERATOR OF THE NNPC/SPDC/TEPNG/AGIP JOINT VENTURE
TENDER OPPORTUNITY: PROVISION OF COMPLETIONS EQUIPMENT AND SERVICES FOR SPDC.
NIPEX NUMBER: SPDC. 00000427
TENDER REF: CW555352
(1.0) INTRODUCTION
SPDC hereby invites reputable and competent Nigerian Companies with the requisite expertise, experience, skilled manpower, and technology to apply to be considered for inclusion in the bid list for the above contract.
(2.0) SCOPE OF WORK/ SERVICE REQUIREMENTS
CONTRACTOR shall design, procure, direct, supervise, and control Completion equipment and services, and associated operations as defined herein and assume liabilities as provided in the Contract in either of the 2 modules specified. Consequently, CONTRACTOR shall provide:
Module 1 would cover upper and lower completion services for oil and gas wells:
- Provision of Gas well upper completion equipment and deployment services for completion types ranging from 3-1/2″ to 7″ respectively.
- Provision of Oilwell upper completion equipment and deployment services for completion types ranging from 2-3/8″ to 4-1/2″ respectively.
- Provision of lower completion equipment and deployment services for sand control systems ranging from 3-1/2″ to 6-5/8″ systems for oil well and gas wells respectively inclusive of standalone screen systems, Internal gravel pack systems, and external gravel pock systems;
- Single trip multizone gravel pack systems.
- Single trip completion systems ranging from 3-1/2″ systems up to 7″ systems for oil and gas wells respectively.
- Bridge plug and other isolation packer systems.
- Various Knockout and Formation isolation systems.
- Retrievable Test Treat and Squeeze (RTTS) services.
- Standalone screen systems. Swell packer systems, blank pipes, and gravel pock extensions.
- Adhoc completions equipment ranging from Tubing retrievable surface controlled subsurface safety valve (TRSCSSSV) and Wireline retrievable surface controlled subsurface safety valve (WRSCSSSV) to Gas lift valves, sliding side doors, landing nipples, and mule shoes.
- Equipment handling and deployment systems ranging from screen tables to lifting subs and wash pipes;
Module 2 would cover Technology-driven sand control applications for the wells:
- Wellbore Geometry Swellable Polymer Sand Control Screen System
- Expandable sand control screen systems
- Solid expandable systems
(3.0) MANDATORY REQUIREMENTS
- To be eligible for this exercise, interested Tenderers are required to be prequalified in the Service Categories 1.01.12 Downhole pressure control equipment and 3.04.17 Well completion services in the NipeX Joint Qualification System (NJQS) database. All successfully pre-qualified suppliers in this category will receive a Technical and Commercial Invitation to Tender (ITT).
- Bidders must comply with Nigerian content requirements.
- To determine if you are pre-qualified and con views the product/service category you are listed for: Open http://vendors.nipex-ng.com and access NJQS with your login details. Click on the Products/Services Status tab to view your status and product codes.
- If you are not listed in a product/service category you are registered with the Department of Petroleum Resources (DPR) to do business, contact the NipeX office is 8/10, Bayo Kuku Road, Ikoyi, Lagos, with your DPR certificate as evidence for verification and necessary update.
- To initiate the NJQS pre-qualification process, access www.nipex-ng.com to download the application form, make necessary payments, and contact the NipeX office for further action.
- To be eligible, all fenders must comply with the Nigerian Content requirements in the NipeX system.
(4.0) NIGERIAN CONTENT REQUIREMENTS
- Tenderers are to note that they will be requested during the technical tender to give full details of their relevant strategy to ensure that they fully comply with the Nigerian Oil & Gas Industry Content Development (NOGICD) Act, 2010 as non-compliance will constitute a FATAL FLAW in all tender evaluations. In line with the above, Tenderers will be required to ensure that information on the following, among others, is included in their technical submission:
- Tenderer shall demonstrate that entity is a Nigerian-registered company with 51% or more shareholding capacity. Submit certified true copies of CAC forms 10 02 & 07 (or its equivalent; CAC 2 3, 2.4, 2.5, etc.). Tenderer shell prov.de evidence of registration with the NCDMB NOGIC JQS and DPR.
- Provide evidence of what percentage of your key management positions is held by Nigerians and what percentage of the total workforce are Nigerians. Also, show overall percentage of work to be performed in Nigeria and those by Nigerian resources relative to total work volume.
- Provide a Nigerian Content Execution Plan providing a detailed description of the role, work scope, man-hours, and responsibilities of all Nigerian companies and personnel that would be involved in executing the work. Also, provide details of Nigerian Content focal point or manager.
- State proposed total scope of work to be conducted by Nigerian personnel whether contracted directly or under subcontract agreements) with names and addresses including evidence of well-equipped offices and workshops; attach post-experience of such patronage.
- Tender shall provide evidence of Category C NCEC certificate and or NCEC Category 1,2,3 OR 4 for Construction and Movable equipment group (EC) to demonstrate at least 50% ownership of the completion equipment to be utilized in executing the work scope
- Vendors are to demonstrate strict compliance with the provisions of Nigerian Oil & Gas Industry Content Development Act and also provide the following requirements.
- Detailed description of the location of in-country committed facilities & infrastructure (Technical/Administrative office, Workshop, warehouse, etc.) in Nigeria to support this contract.
- Tenderer shall comply with the latest approved version of NCDMB HCD guideline by committing (via a letter of undertaking) to providing Project-Specific training, man-hour, budget, skill development and understudy plan for Nigerian personnel utilizing OGTAN registered trainer(s) or other approved NCDMB training institution(s).
(5.0) CLOSING DATE
Only tenderers who are prequalified and LIVE in the relevant Product/Service codes 1.01.12 and 3.04.17 as at 30 November 2021 being the advert closing date shall be invited to submit Technical Bids.
(6.0) ADDITIONAL INFORMATION
- Expected Contract Award Date: Q2.2022
- Contract Duration: 2 years + a 1 year extension option
- All respondents to Shell Nigeria advertisements must ensure full compliance with the Nigerian Oil & Gas Industry Content Development Act, 2010. Respondent should educate themselves on the Nigerian Oil & Gas Industry Content Development Act, 2010. Non-compliance will disqualify respondents from further consideration.
- This advertisement is not an invitation to tender for the above services. There is no commitment or obligation, implied or otherwise, for SPDC to Issue a tender or enter into a contract. Participation in the pre-qualification exercise does not construe or imply any commitment to any party or entitle any party to any indemnity or any form of payment from SPDC.
- Suppliers eligible for this tender opportunity are expected to be prequalified in NJQS under the relevant product/service categories.
- All costs incurred in preparing and processing NJQS prequalification shall be to the contractor’s accounts.
- This advertisement shall neither be construed as any form of commitment or the part of THE SHELL PETROLEUM DEVELOPMENT COMPANY OF NIGERIA LIMITED to award any contract to any company and or associated companies, sub-contractors, or agents, nor shall it entitle prequalified companies to make any claims whatsoever, and/or seek any indemnity from THE SHELL PETROLEUM DEVELOPMENT COMPANY OF NIGERIA LIMITED and or any of its partners by virtue of such companies having been prequalified in NJQS.
- The tendering process shall be the NNPC contracting process requiring pre-qualified companies to submit technical tendons first. Following a technical review, only technically and financially qualified contractors will be requested to submit commercial tenders
- NNPC/SHELL PETROLEUM DEVELOPMENT COMPANY OF NIGERIA LIMITED reserves the right to reject any and or all pre-qualified suppliers at its sole discretion and at no cost whatsoever.
- THE SHELL PETROLEUM DEVELOPMENT COMPANY OF NIGERIA LIMITED will communicate only with authorized officers of the pre-qualifying companies and NOT through individuals or Agents.
- Please visit the NipeX Portal at www.nipex-ng.com for this Advert and for other Information.
ES/NCDMB/SPDC-ADV/UPD/271021 / PROVISION OF COMPLETIONS EQUIPMENT AND SERVICES FOR SPDC
Visit us on- http://www.shellnigeria.com
