DEADLINE: 5TH AUGUST, 2022
BELEMAOIL PRODUCING LIMITED (BPL)
INVITATION TO TENDER FOR THE PROVISION OF COILED TUBING SERVICES FOR BPL
TENDER REF: BPL.PED.CT.2201.01
NIPEX REF: 2100002448
(1.0) INTRODUCTION
Belemaoil Producing Limited (BPL) in its role as operator of the NNPC/BPL Joint Venture, in its capacity as Operator of Oil Mining Lease 55 (OML 55) on behalf of itself and is under a Joint Venture (JV) with Nigerian National Petroleum Corporation (NNPC) hereby invites reputable and competent registered Nigerian companies (DPR registered and licensed) with proven experience in the provision of the Coiled Tubing Services listed in the scope of work below to apply for exclusion into the bid list of the tender.
(2.0) SCOPE OF WORK/SERVICE REQUIREMENTS
The work scope shall include but not limited to the following:
- Perform acidizing Nitrogen lifting perforation wash well circulation, tubing/sand clean out, pumping, fishing and stimulation services inducing but not limited to the provision of Coiled tubing and associated equipment and services.
- Provide operating procedures for the completion tools and accessories, including but not limited to the setting of packers, the functioning and retrieval of down hole tools
- Furnish all contractor items, contractor personnel and services necessary to perform the work;
- Carry out all transportation of Contractor item and goods to and fro BPL nominated Take Off Point and co-ordinate the transportation of contractor materials to and fro BPL nominated Take Off Point and
- Provide complete function testing certification, pressure testing and complete assembly and retaliation as applicable, of all Contractor items on arrival at Worksite and prior to performing the work.
- Provide operational procedure for each of the services provided.
- Provide test charts and updated certification for all Equipment and Accessories to be mobilize for each job.
- Be able to perform the under listed operations:
- Coiled Tubing Cement Plug back.
- Coiled Tubing Plug and Abandon (P&A).
- Coiled Tubing Perforation
- Coiled Tubing Wellbore Cleanout
- Coiled Tubing Zone Switch
- Coiled Tubing Cement Placement/Squeeze
- Coiled Tubing Sand Consolidation
- Coiled Tubing Screen Deployment
- Coiled Tubing Nitrogen Lift Operations
- Coiled Tubing Fishing Operations
- Coiled Tubing Milling Services
- Coiled Tubing Well Stimulation, Tubing Pickling and Solvent Soak.
- Coiled Tubing Flowline acid/solvent treatment
- Coiled Tubing Water Shut Oft
- Other Coiled Tubing Services.
EQUIPMENT
The Coil Tubing Equipment should be able to carry out all activities with minimum impact on the environment. The Equipment shall have the under listed basic Coil tubing specification to qualify for consideration.
(a) Coil tubing Reel minimum Length of 4500m
(b) Outer Coil tubing diameter of 1.5” or 1.25”
(c) Working pressure of 10.000 psi
(d) Conventional BOP: suitable for the Unit
(e) Injector Head Suitable for 1.5” or 1.25 CT
(f) Side Door Stripper
(3.0) MANDATORY REQUIREMENTS
To be eligible for this tender exercise, interested contractors are required to be pre-qualified in any of the following NJQS Service categories in the NipeX Joint Qualification System (NJQS) database
(i) 1.01.11 Coiled Tubing Tools & Accessories
(ii) 3.04.18- Well Overhauling / Stimulation Services
All successfully prequalified suppliers in this category will receive a Technical Invitation to Tender (ITT).
- To determine if you are pre-qualified and to view the product/service category you are listed for, open http://vendors.nipex-ng.com and access NJQS with your log in details. Click on Products/Services Status tab to new your status and product codes.
- If you are not listed in a product/service category but are registered with the Nigerian Upstream Petroleum Regulatory Commission (NUPRC) to do business, contact the NipeX office at a Bayo Kuku Road Ikoyi Lagos with you NUPPC certificate as evidence for necessary update.
- To initiate the NJQS prequalification process, open nipex.ng.com click on services tab followed by NJQS registration
- To be eligible, all tenders must comply with the Nigerian Content requirements in the NipeX system.
(4.0) NIGERIAN CONTENT REQUIREMENTS
Tenderers are to note that they will be requested during the technical tender to give full details of their relevant strategy to ensure that they fully comply with the Nigerian Oil & Gas Industry Content Development (NOGICD) Act, 2010 as non-compliance will constitute a FATAL FLAW in all tender evaluations. In line with the above. Tenderers will be required to ensure that information on the following among others is included in their technical submission:
- Demonstrate that the entity is a Nigerian Registered Company, or Nigerian Registered Company as the contracting entity in genuine alliance or joint venture with foreign company with detail on scope and responsibilities of parties for this work.
- Such companies must show evidence of joint venture binding agreement duly signed by the CEO of both companies including evidence or plans of physical operational presence and set-up in Nigeria.
- International or multinational companies working through a Nigerian subsidiary must demonstrate that a minimum 50% of equipment to be deployed for execution of wok shall be owned by the Nigerian subsidiary by providing a list of equipment for this tender and indicating those that will be owned by the Nigerian subsidiary.
- Furnish details of company ownership and shareholding structure. Also submit clear photocopies of your CAC Forms CO2 and CO7.
- Provide evidence of what percentage of you key management positions held by Nigerians and what percentage of the total work force are Nigerians. Also show overall percentage of work to be performed in Nigeria and those by Nigerian resources relative to total work volume.
- Provide a Nigerian Content Plan providing a detailed description of the role, work scope, man-hours and responsibilities of all Nigerian companies and personnel that would be involved in executing the work. Also provide details of Nigerian Content focal point or manager.
- State proposed total scope of work to be conducted by Nigerian personnel (whether contracted directly or under subcontract agreements) with names and addresses including evidences of well-equipped offices and workshop: attach past experience of such patronage.
- Provide the Nigerian Content Equipment Certificate NCEC for equipment.
- Demonstrate plan that the company has legal insurance and banking operations with Nigerian firms
- Specific to this project, the tenderer shall provide detailed plan and strategy for capacity development training on this tender which shall comply with 10% of project hours as HCD training hours or 3% of total contract cost whichever is greater. The number of trainees shall be determined in accordance with NCDMB HCD training guidelines and the training modules shall be project-specific courses as stated in the ITT (including all software to be used number of personnel name of organization providing such training and evidence of past training record) including description of any specific programs in place for transfer of technology and skills to indigenous businesses and Nigerians over the next five (5) years
(5.0) CLOSING DATE
Only tenderers who are pre-qualified in the NJQS Product/ Service categories as listed in Section 30 above as at 4:00pm, 5 August, 2022 being the advert closing date shall be invited to submit Technical Tenders.
(6.0) ADDITIONAL INFORMATION
- Expected contract award-Q2 2021.
- Contract duration will be for a 2 years firm and a one-year extension option
- All cost incurred in registering and prequalifying for this and other product/service categories shall be borne solely by Tenderers
- Tenderers that are prequalified for this product/service category in NJQS must ensure that the name and contact details (physical address, email address and telephone number) of their company and authorized/responsible personnel is up-to-date in their company profile in the NJQS database.
- BPL shall communicate only with authorized/responsible personnel of prequalified companies and not through unauthorized individuals or agents.
- All respondents to BPL must ensure full compliance with the Nigerian Oil and Gas Industry Content Development Act.
- 2010 (NOGICD) All respondents should educate themselves on the requirements of the NOGICD and ensure full compliance. Non-compliance is a FATAL
- Technical details and specification of the rigs required will be issued to prequalified Tenderers in the relevant categories via the Technical
- This advertisement of “Invitation to tender” shall not be construed to be a commitment on the part of NNPC/BPL to award any form of contract to any company and/or associated companies sub-contractors or agents nor shall it entitle any company submitting documents to claim any indemnity from NNPC/BPL and/or any of its partners NNPC/BPL reserves the right to take final decision on any of the documents received in the Technical package.
