DEADLINE:18TH JANUARY, 2023
HIERS HOLDING OIL AND GAS LIMITED (HHOG)
(RC NO.1515696)
INVITATION TO TENDER FOR THE PROVISION OF SLICKLINE SERVICES
HHOG-PHC-TEC-2022-004
SHOPPING CART NAME: HEIRSOIL.00000028
SHOPPING CART NUMBER: 1000006357
(1) INTRODUCTION:
HEIRSHOLDINGS OIL & GAS LIMITED (hereinafter referred to as “HHOG”) seeks interested and pre-qualified Contractors for Provision of Slickline Services in OML 17 on a call-off basis as detailed in item 2 below. The contract is proposed to commence in Q1 2023 and continue for a duration of Three (3) years with an option to extend for additional period of two (2) years.
(2) SCOPE OF SERVICES:
The Contractor shall provide all resources (equipment, tools, personnel, materials etc.) required to conduct WR-ScSSV installation and retrieval, drift runs, mechanical plug and prong installation and retrieval, down-hole completion accessories manipulation etc. operations as may be required.
Provide equipment, consumables, personnel, and back-up which shall include but not limited to:
(i) Drift, bottom hole sampling and bailer runs;
(ii) Running, setting, retrieving down hole safety valves, water injection valves & other down hole flow control devices.
(iii) Critical Sliding Sleeve manipulation in Multi Zone Gravel Pack completion.
(iv) Reservoir pressure measurements, temperature surveys and surface Tubing Head pressure recording.
(v) Running, setting and retrieving Retrievable Bridge Plugs and Straddles.
(vi) Well anomalies and investigations.
(vii) Slickline Fishing operations.
(viii) Electronic Downhole shut-in tool operations
(ix) SCSSV change outs; Wax cutting
(x) Gas lift valve change outs
(xi) Zone changes
(xii) Plug setting and pulling
(xiii) Leak Investigations TRSSV lockout
(xiv) Bailing, Kinley Caliper & Tubing Perforator Services
(xv) Fishing; Servicing of Sub Surface Flow Control Equipment
(3) MANDATORY REQUIREMENTS:
(3.1) To be eligible for this tender exercise, interested Tenderers are required to be pre-qualified in the 3.04.20 – Slickline Services, (Product/Service) category in NipeX Joint Qualification System (NJQS) database. All successfully pre-qualified Contractors in this category will receive invitations to Tender.
(3.2) To determine if you are prequalified and view the product/service category you are listed for: Open http://vendors.nipex-ng.com and access NJQS with your log in details, click on continue Joint Qualification scheme tool, click check “my supplier status” and then click supplier product group.
(3.3) If you are not listed in this product/service category and you are registered with NUPRC, please contact NipeX office at No.8 Bayo Kuku Street, Ikoyi Lagos with your NUPRC certificate as evidence for verification and necessary update.
(3.4) To initiate the JQS pre-qualification process, access www.nipex-ng.com to download an application form, make necessary payments and contact NipeX office for further action.
(3.5) In addition, Tenderers shall also be required to comply with the Nigerian Content requirements in the Nigerian Oil & Gas Industry Content Development Act 2010.
(4) NIGERIAN CONTENT REQUIREMENTS:
Tenderers are to note that they will be requested during the technical tender to provide details of their relevant strategy to ensure that they fully comply with the Nigerian Oil & Gas Industry Content Act, 2010 as provided at www.nnpcgroup.com and www.nigcontent.com , in view of the fact that non-compliance will constitute a fatal flaw in all contract evaluations.
The Nigerian Content Development Monitoring Board (NCDMB) will require each Tenderer to:
(1) Demonstrate that the entity proposed for execution of the service, is a Nigerian Registered Company, or Nigerian Registered Company as the contracting entity in genuine alliance or joint venture with foreign company with details on scope and responsibilities of parties for this work. Such companies must show evidence of joint venture binding agreement duly signed by the CEO of both companies including evidence or plans of physical operational presence and set-up in Nigeria
(2) Furnish details of company ownership and shareholding structure. With photocopies of its CAC Forms CO2 and CO7.
(3) Provide evidence of what percentage of its key management positions are held by Nigerians and what percentage of the total work force are Nigerians. And show overall percentage of work to be performed by Nigerian resources relative to total work volume.
(4) Provide a Nigerian Content Plan with detailed description of the role, work scope, man-hours and responsibilities of all the Nigerian companies and personnel that will be involved in executing the work.
(5) State proposed total scope of work to be conducted by Nigerian personnel (whether contracted directly or under subcontract agreements) with names and addresses including evidence of well-equipped offices and workshop.
(6) In line with the NCD Human Capacity Development Initiative, Bidder shall commit to providing Project-Specific training, man-hour, budget, skill development and understudy plan for Nigerian personnel utilizing OGTAN registered trainer(s) or other approved NCDMB training institution (s).
(7) Provide evidence of domiciliation of project management and procurement centers in Nigeria with physical addresses (not P.O. Box).
(8) Provide detailed description of the location of in-country facilities (Equipment, storage, workshops, repair, maintenance and testing facilities
(9) Provide detailed statement with evidence of how it intends to maximize the use of Nigerian made goods and services.
(10) Provide evidence of registration with NCDMB NJQS.
(11) Bidders to provide valid NCEC Category “SS” for Service & Support Group.
(12) Provide details on any other Nigerian Content initiative the company is involved in.
(5) CLOSING DATE
Only Tenderers who are registered with NJQS Product Group 3.04.20 – Slickline Services, as at 4pm on 18 January 2023 being the advert closing time/date shall be invited to submit Technical and Commercial Bids.
(6) GENERAL CONDITIONS
(i) Please note that all interested Contractors are required to strictly adhere to the following conditions in relation to their response to this Advert.
(ii) All costs incurred in preparing and processing NJQS prequalification and responding to this Tender Opportunity shall be to the Contractor’s own account.
(iii) This Advert shall neither be construed as any form of commitment on the part of HHOG to award any contract to any Contractor and or associated contractors, subcontractors or agents, nor shall it entitle pre-qualified Contractors to make any claims whatsoever, and/or seek any indemnity from HHOG and/or any of its partners by virtue of such Contractors having been pre-qualified in NJQS.
(iv) The tendering process shall be undertaken in accordance with the NNPC contracting process which requires prequalified Contractors to submit their documentation in the following manner:
- Pre-Qualified contractors in the relevant Services category in NJQS will be requested to submit their Technical and Commercial Tenders at the same time, Double Envelope Tender (DET).
- Following the Technical evaluation process, only technically acceptable and financially qualified contractors will have their Commercial Tenders opened and evaluated.
HHOG will communicate only with authorised officers of the qualifying Contractors at each stage of the Tender process, as necessary, and will NOT communicate through individuals or appointed Agents.
ES/NCDMB/HHOG/ADV/IPPG/131222/PROVISION OF SLICKLINE SERVICES
