DEADLINE: 14TH JULY, 2023
AMNI INTERNATIONAL PETROLEUM DEVELOPMENT COMPANY LIMITED
CALL FOR PRE
–QUALIFICATION FOR OFFSHORE FLOWLINES REPLACEMENT AND FACILITIES MODIFICATIONS PROJECT: PROVISION OF ENGINEERING, PROCUREMENT, CONSTRUCTION, INSTALLATION, HOOK-UP AND PRE-COMMISSIONING (EPCI) SERVICES
AMNI REFERENCE NUMBER: CAP-AMN-NCD-0423-ADV-20005

(1.0) INTRODUCTION
Amni International Petroleum Development Company Limited (“Company”) hereby announce a prequalification opportunity to prospective bidders with requisite expertise, experience, skilled manpower and technology for the provision of turnkey engineering, procurement, construction, installation, hook-up, and pre-commissioning (EPCI) services for new rigid flowlines and marine hose dynamic risers

(2.0) SCOPE OF WORK
The Scope of work consists of activities required to accomplish, as a minimum, turnkey engineering, procurement, pre-fabrication, installation, and pre-Commissioning of two rigid pipe flowlines and marine hose dynamic risers, complete with appurtenances, to replace two existing flowlines, as further detailed herein below:

(a) Project management and administration.

(b) Pre-service and in-service analysis and detailed design of rigid pipe flowlines and appurtenances.

(c) Plans and procedures development.

(d) Procurement of all materials not specifically identified as Company-furnished.

(e) Onshore pre-fabrication.

(f) Modifications to Company’s facilities to accommodate new flowlines and risers.

(g) Abandonment of existing flexible flowlines and risers, including but not limited to flushing, inhibiting, installation of blind flanges, and lowering of risers to seabed.

(h) Loadout and offshore transport of all materials.

(i) Installation of rigid production flowlines and marine hose dynamic risers, including but not limited to cleaning, gauging, hydrotest, and dewatering.

(3.0) SPECIAL CONSIDERATIONS
Prospective bidders must have proven experience as a company in terms of performing the necessary- technical studies, brownfield structural and piping modifications offshore, abandonment activities, and offshore installation, hook-up, and pre-commissioning activities. Specifically:

(a) Prospective bidder must have installed flow lines of the required diameters in similar water depths. Water depth at the location is approximately 13m with respect to lowest astronomical tide (LAT).

(b) Prospective bidder must furnish details of the scope of work, year, location, name of project(s), client, and client point of contact for previous flowline installation within the last 5 years.

(c) Prospective bidders must either own and operate its own pipelay vessel suitable for the pipe diameters and water depth or have exclusive rights to charter a suitable pipelay vessel and will be required to furnish the particulars of such vessel.

(4.0) MANDATORY PREQUALIFICATION REQUIREMENTS/DOCUMENTS
Prospective bidders must provide the following documentation for considerations

(a) Evidence of registration with the Nigerian Upstream Petroleum Regulatory Commission (NUPRC) to perform related services.

(b) Evidence of registration with the Nigerian Content Development Monitoring Board (The Board) for the category of Work.

(c) Health, Safety & Environment Management System, including certification.   

(d) Quality Management System, including certification.

(e) Corporate profile, organization size and structure, including any parent company, technical partnership, alliance, or joint venture companies to whom they belong, together with CV and experience profile of key management personnel.

(f) Details of prospective bidder’s facilities for engineering and projects management, taking care to note whether the facilities depicted are owned by the prospective bidders, leased, or subcontracted.

(g) Details of prospective bidder’s facilities for pre- fabrication, storage, and loadout, taking care to note whether the facilities depicted are owned by prospective bidder, leased, or subcontracted. Prospective bidder shall also furnish details of quayside, including equipment for loadout.

(h) Details of prospective bidder’s pipelay vessel for installation taking care to note whether the vessel depicted are owned by prospective bidder or offered via an exclusive charter for the work. Prospective bidder must furnish evidence in support. Prospective bidder shall also furnish evidence that the vessel is currently maintained in class and furnish a complete copy of its most recent certified vessel inspection report(s) as relates to class, as well as its crane(s) and pipelay tensioning system.

(i) Details of prospective bidder’s offshore spread for pre-commissioning activities taking care to note whether the offshore spread depicted are owned by prospective bidder, chartered/leased, or subcontracted.

(j) Demonstration of prospective bidder’s relevant experience, via suitable analogues, listing details of (and providing completion certificates for) most recent five (5) pipelay installation / pre-commissioning / abandonment works completed.

(k) Preliminary subcontracting plan, identifying what portions of the work prospective bidder would propose to self-perform and what portions of the work prospective bidder would propose to subcontract.

(l) Financial audited accounts for last three (3) year’s annual turnover of over USD50Million per year.

(m) Tax clearance for the last three (3) years that support the audited accounts above.

Only prospective bidders considered to have satisfactorily met Company’s pre-qualification requirements shall be shortlisted and issued Company’s invitation to tender.

(5.0) NIGERIAN CONTENT REQUIREMENT
Prospective bidders are to note that any participant in any tender process will be required to give full details of their strategy to ensure that they fully comply with provisions of the NOGICD Act. Submissions shall be evaluated strictly with the minimum evaluation criteria defined in NOGICD Act.

In line with the above, any participant in any tender process will be required to submit at the tender stage the following in compliance with the NOGICD Act:

(a) Evidence that its corporate entity satisfies the NOGIC Act requirements for providing Engineering Procurement, Construction, Installation, Hook-Up and Pre-commissioning (EPCI) Services with evidence demonstrate compliance.

(b) Evidence of its corporate entity’s ownership structure including CAC Form C02 and C07, registration on NOGIC NJQS, and NUPRC certificate.

(c) Nigerian Content Plan which shall explain the methodology of how it intends to comply with the requirements of the NOGICD Act and how to achieve the set target(s) in the Schedule of the NOGICD Act and any targets set by The Board.

(d) A plan of how it intends to give first consideration to materials manufactured in Nigeria as well as assembled goods of Nigerian origin which shall include a breakdown of all materials and consumables to be utilized and identifying those that are found locally, finished products and materials that will be procured from Nigerian manufacturing and assembly plants, finished goods that order can be placed from outside Nigeria through Nigerian authorized vendors and accredited agents, and those that would be directly imported.

(e) Details of services subcontracted to Nigerian vendors.

(f) Details of its corporate organisation, overall human resources structure (management, supervisors, senior and junior skilled officers, etc.), identifying positions manned/occupied by Nigerian nationals with evidence of type of employment in-country and identifying the positions manned/occupied by other nationals.

(g) Detailed description of the location of in-country committed facilities & infrastructure (assets equipment, technical office, facilities, administrative offices and space, storage etc.) to carry out the Work.

(h) Bidder must have Nigerian Content Equipment Certification NCEC Category FC (Fabrication & Construction) for pipe/flowlines modifications maintenance and installation.

(i) If in partnership with other companies, provide evidence of the partnership, alliance or joint venture Such evidence shall be the binding agreement(s) duly signed by the Chief Executive Officers or persons of comparable designation of each party. Such agreements must be governed by the laws of the Federal Republic of Nigeria. The agreements must clearly state the work-share ratio, responsibilities of parties for the Work, and evidence or plans of physical presence and operational set-up in Nigeria.

(j) A detailed training plan which shall provide sustainable training and development (including certification as applicable) for Nigerians in line with the Human Capacity Development Initiative Guideline of The Board. The training plan will include contract-specific training and estimated man-hours. Prospective bidder is required to submit MOA with Oil and Gas Trainers Association of Nigeria (OGTAN) trainers to support their training plan, which shall be 3% of the total contract sum.

(k) A Community Content Plan in line with The Board Community Content Guideline for review and approve by The Board.

(l) Bidder must provide MOA with an Engineering Firm with a valid COREN License.

(m) If bidder has COREN license to operate as an engineering firm, this shall suffice.

(n) Bidder should provide MOA with owner (or lease company) of pipelay vessel which has the required NCDMB Marine Vessel Certification.

Prospective bidders and any tender participants shall comply with all the provisions of the NOGICD Act and associated guidelines that relate to any tender and comply with the minimum Nigerian Content percentage for the scopes which are covered in the Schedule of the NOGICD Act. This also includes any other requirements that may arise from time to time not explicitly stated in this advert, but which apply to the services in fulfilment of the NOGICD Act, in the submission of their responses.

Note:
Failure to fully comply with the NOGICD Act or demonstrate commitment to Nigerian Content Development Policy of the Nigerian Government shall result in the disqualification of prospective bidder from the pre-qualification process and/or tender process.

(6.0) CLOSING DATE & SUBMISSION OF PREQUALIFICATION DOCUMENTS
(a) The closing date for responses to this CALL FOR PREQUALIFICATION is midnight 14 July, 2023.

(b) All responses are to be submitted electronically through the following link https://forms.gle/sC7Qv2kZn5oYrCZC9 To fill in the pre-qualification form, visit the link and sign in or create an account to access the form.

(c) Any inquiries regarding Prospective Bidders’ response to this CALL FOR PRE-QUALIFICATIONS are to be made to info@amni.com.

(7.0) ADDITIONAL INFORMATION
(a) This CALL FOR PRE-QUALIFICATION shall not be construed as an Invitation to Tender (ITT) or any form of commitment on the part of Company to award a contract to any entity, vendor or prospective bidder or company and/or associated companies, subcontractors, or agents or to carry out the work described.

(b) This CALL FOR PRE-QUALIFICATION shall not entitle prospective bidder to make any claims whatsoever and/or seek any indemnity from Company and/or any of its partners by virtue of such prospective bidder having responded to this advertisement.

(c) Company reserves the right to reject any and/or all respondents to this CALL FOR PREQUALIFICATION at its sole discretion and at no costs whatsoever.

(d) Any further progress in this CALL FOR PREQUALIFICATION shall be at the discretion of Company and via its own facilities. Company shall not enter correspondence with any prospective bidder, company or individual on why a company was shortlisted or not short-listed.

(e) All costs incurred in preparing and processing this prequalification shall be borne solely by respondent, prospective bidder, individual contractors, suppliers, and vendors.

(f) Company will communicate only with authorized officers and/or vendors and NOT through individuals or agents.

ES/NCDMB/AMNI/ADV/IPPG/230523/PROVISION OF ENGINEERING, PROCUREMENT, CONSTRUCTION, INSTALLATION, HOOK-UP AND PRE-COMMISSIONING (EPCI) SERVICES