DEADLINE: 29TH JUNE, 2023
NIGERIAN AGIP OIL COMPANY LIMITED (NAOC)
OPERATOR OF THE NNPC/NAOC/OANDO JOINT VENTURE
INVITATION TO TENDER FOR THE PROVISION OF SOLID CONTROL EQUIPMENT AND SERVICES FOR NAOC JV LAND AND SWAMP OPERATIONS
NIPEX TENDER NO. 1000006589
(1) INTRODUCTION
The Nigerian Agip Oil Company Limited (NAOC) has a requirement to issue SOLID CONTROL EQUIPMENT AND SERVICES, contract for the Scope of Work identified below on NAOC land and swamp area wells for three (3) years firm period and two (2) one (1) year optional extensions.
NAOC therefore invites submission for the purpose of technical evaluation from suitable and reputable companies having the capability and experience to undertake the under defined scope of work.
(2) SCOPE OF WORK
Contractor shall supply and change-out/install, operation, servicing and maintenance Solids Control Equipment and ancillary equipment, tools and hoses (Shale Shakes, HI-G Dryers, Screens, Single or Dual centrifuges, on-line system) on board of the rig for Company drilling operations in Nigeria.
This Work shall be performed in accordance with the specification contained here-in and the Contract in general.
It is of utmost importance to carry out all activities with minimum impact on the environment and maximum care of health and safety of all concerned, directly or indirectly, with the activities.
GENERAL DESCRIPTION
The Contract shall perform the work in accordance with Company operating instruction or Contractor’s written operating instructions approved by Company, utilizing its own know-how and operating experience.
GENERAL DESCRIPTION
The Contractor shall perform the work in accordance with Company operating instructions or Contractor’s written operating instructions approved by Company, utilizing its own know-how and operating instructions approved by Company shall plan, direct, supervise and control operation of Solids Control Equipment.
Consequently, Contractor shall:
(a) Perform Solids Control operations, and associated services including but not limited to operating, servicing, maintenance and testing of all items of equipment and ancillary and optional equipment in accordance with the well specifications on a day-rate basis or on an Incentive basis as described herein;
(b) Provision of high volume, variable speed centrifuges with, associated feed pumps, high speed cuttings dryers, feed pumps, effluent-tanks, screw augers and other equipment necessary for reducing oil on cuttings emissions and potential zero fluid discharge operation.
(c) Furnish all equipment; labor, materials for Installation of solids control equipment and associated piping onto the selected drilling rig.
(d) Provision of experienced onshore/swamp solids control technicians for solids control system monitoring, maintenance and repair of equipment provided and integrated drilling fluid system planning.
(e) Furnish all equipment, materials and services specified.
(f) Provision of shaker screen inventory for rig based shakers.
(g) Carry out and co-ordinate all onshore storage and transport of Contractor Items and Personnel, to and from the Company Supply Base and to and from Rig Site;
(h) Execute all work in connection with this Scope of Work.
Failure to meet any of these requirements shall lead to outright disqualification.
CONTRACTOR shall conform to ISO 9000 series International Standard. All the activities shall be carried out with minimum impact on the environment and maximum care of health and safety of all concerned, directly or indirectly with the activities.
(3) MANDATORY REQUIREMENTS
(a) To be eligible for this tender exercise, interested contractors are require to be registered and active (“LIVE status) in the Product/Service category – 3.04.13 –“DRILLING FLUIDS/MUD SERVICES – Cleaning in the NipeX Joint Qualification System (NJQS) database. All successfully pre-qualified suppliers in these categories as at the closing date of this advert will receive Invitation to Technical Tender (ITT).
(b) To confirm if you are pre-qualified and view the product/service category you are listed for: Open www.nipex-ng.com and access NJQS with your log in details, click on continue Joint Qualification Scheme tool, click check my supplier status and then click supplier product-group.
(c) If you are not listed in a product/service category but you are registered with NUPRC to do business, contact NipeX office at 30, Oyinkan Abayomi Street, Ikoyi Lagos with your NUPRC certificate as evidence for necessary update.
(d) To initiate the JQS pre-qualification process, access www.nipex-ng.com to download an application form, make necessary payments and contact, NipeX office for further Action.
(e) To be eligible, all tenders must comply, with the Nigerian Content requirements in the NipeX system.
(4) NIGERIA CONTENT REQUIREMENT
(1) Tenderer shall demonstrate evidence of being a Nigerian indigenous company having greater than 51%. Nigerian shareholding. Provide evidence of Company Ownership Structure forms CO2 and CO7 registration on NOGIC JQS and NUPRC certificate.
(2) Detailed description of the location of in-country committed facilities & infrastructure (Administrative/Technical Offices, Workshop, etc.) in Nigeria to support this contract.
(3) Tenderer shall comply, with the latest approved version of NCDMB HCD guideline by committing (via a Letter of undertaking) to providing Project “Specific training, man-hour, budget, skill development and understudy plan for- Nigerian personnel utilizing OGTAN registered trainer(s) or other approved NCDMB-training institution(s):
(4) Tenderers shall provide evidence of valid NCEC Category 1,2,3,4 or 5 for Services and Support (SS) group to demonstrating ownership of equipment not limited to Solid Controls equipment to execute work scope.
(5) Provide evidence of what percentage of your key management positions is held by Nigerians and what percentage of the total work force are Nigerians. Also, show overall percentage of work to be performed in Nigeria and those by Nigerian resources relative to total work volume.
NOTE: Non-Compliance with Nigerian Content Requirements is a Fatal Flaw
(5) CLOSING DATE
Only Tenderers who are registered and active (“Live” status) with NJQS in the Product/Service Category 3.04.13- DRILLING FLUIDS/MUD SERVICES- Cleaning as at the closing date advert on 29 June, 2023 shall be invited to submit Technical Bids.
NCDMB CERTIFICATION NUMBER: ES/NCDMB/NAOC/ADV/UPD/260423
This advertisement of “Tender Opportunity” shall not be construed as a commitment on the part of NAOC, nor shall it entitle Applicants to make any claims whatsoever and/or seek any indemnity from NAOC and/or any of its Partners by virtue of such Applicants having responded to this Advert.
