DEADLINE: 25TH JULY, 2023
HEIRS HOLDINGS OIL & GAS LIMITED
(RC NO. 1515696)
INVITATION TO TENDER FOR THE PROVISION OF FACILITIES (MECHANICAL MODIFICATION AND UPGRADE WORKS IN OML-17)
SHOPPING CART NO.: 1000006696
SHOPPING CART NAME: HEIRSOIL 00000042
HHOG-PHC-ENG-2022-060

(1) INTRODUCTION:
HEIRS HOLDINGS OIL & GAS LIMITED (hereinafter referred to as “HHOG”) seeks interested and pre-qualified Contractors for Provision of Facilities (Mechanical Modification and Upgrade Works in OML 17) on a call-off basis as detailed in item 2 below. The contract is proposed to commence in Q1 2023 and continue for a duration of Three (3) years with an option to extend for additional period of one (1) year.

(2) SCOPE OF SERVICES:
The scope and services required for FACILITIES MODIFICATION AND UPGRADES shall include but not limited to the following:

(1) Mobilizing own transport spread, equipment, personnel, and supplied materials to work sites.

Mechanical (Pre-fabrication Works)
(1) All pre-fabrication and fabrication work, requisite piping works for the realisation of the works shall be fabricated/modified in all respect, as to achieve substitutions and hook-ups.

(2) As a minimum all fabricated spools shall be subjected to NDT test (hydrotest and radiography).

(3) CONTRACTOR shall provide all materials and equipment necessary for carrying out hydrostatic pressure testing of all spool pieces or fabricated pipe works e.g., stud bolts, gaskets, blind flanges, pumps, recorders etc. in accordance with COMPANY DEPs to the test pressure specified on each isometric piping drawing.

Piping Works: The making of all field bends, cut pipe lengths as required and make welds in accordance with COMPANY DEPs.

Inspection, Testing and Radiographic Examination of Welds.
Carry out examination on 100% of welds on piping, 10% radiographic examination of structural buff welds and 100% magnetic particle inspection (MPI) on structural fillet welds.

All personnel, equipment and materials required for radiography shall be supplied by the CONTRACTOR and shall be subject to COMPANY’S pre-mobilization inspection prior to deployment or utilisation on the project.

Painting Works:
Painting of all newly installed/modified pipe works and production units Installed in the cause of any facilities (Mech Modification & Upgrades)

Civil works:
(1) Earth excavation and construction of new concrete foundation base for new installation:

(2) All reinforcement shall be set out as indicated on approved AFC drawings.

(3) Formwork for the casting of concrete foundation shall be constructed in accordance with COMPANY DEPs walkways: and extension/construction of a new and inter-connecting peripheral gutter and collection channels linking new construction and process areas.

DEMOBILISATION ACTIVITIES:
Following the acceptance of the work by COMPANY and contingent upon satisfactory completion of the Commissioning and Acceptance Phase, the CONTRACTOR shall demobilize from site.

(3) MANDATORY REQUIREMENTS:

(3.1) To be eligible for this tender exercise, interested Tenderers are required to be pre-qualified in the 3.05.01 Steel / Piping / Mechanical Services and 3.05.12 Pipe fitting and Welding Services. (Product/Service) category in NipeX Joint Qualification System (NJQS) database. All successfully pre-qualified Contractors in this category will receive invitations to Tender.

(3.2) To determine if you are prequalified and view the product/service category you are listed for Open http://vendors.nipex-ng.com and access NJQS with your log in details, click on continue Joint Qualification scheme tool, click check “my supplier status” and then click supplier product group.

(3.3) If you are not listed in this product/service category and you are registered with NUPRC, please contact NipeX office at No.8 Bayo Kuku Street. Ikoyi, Lagos with your NUPRC certificate as evidence for verification and necessary update.

(3.4) To initiate the JQS pre-qualification process, access www.nipex-ng.com  to download an application form, make necessary payments and contact NipeX office for further action.

(3.5) In addition, Tenderers shall also be required to comply with the Nigerian Content requirements in the Nigerian Oil & Gas Industry Content Development Act 2010.

(4) NIGERIAN CONTENT REQUIREMENTS:
Tenderers are to note that they win be requested during the technical tender to provide details of their relevant strategy to ensure that they fully comply with the Nigerian Oil & Gas Industry Content Act, 2010 as provided at www.nnpcgroup.com and www.nigcontent.com in view of the fact that non-compliance will constitute a fatal flaw in all contract evaluations.

The Nigerian Content Development Monitoring Board (NCDMB) will require each Tenderer to:

(1) Demonstrate that the entity proposed for execution of the service, is a Nigerian Registered Company, or Nigerian Registered Company as the contracting entity in genuine alliance or joint venture with foreign company with details on scope and responsibilities of parties for this work. Such companies must show evidence of joint venture binding agreement duly signed by the CEO of both companies including evidence or plans of physical operational presence and set-up in Nigeria.

(2) Furnish details of company ownership and shareholding structure. With photocopies of its CAC Forms C02 and C07.

(3) Provide evidence of what percentage of its key management positions are held by Nigerians and what percentage of the total work force are Nigerians. And show overall percentage of work to be performed by Nigerian resources relative to total work volume.

(4) Provide a Nigerian Content Plan with detailed description of the role, work scope, man-hours and responsibilities of all the Nigerian companies and personnel that will be involved in executing the work.

(5) State proposed total scope of work to be conducted by Nigerian personnel (whether contracted directly or under subcontract agreements) with names and addresses including evidence of well-equipped offices and workshop.

(6) In line with the NCD Human Capacity Development Initiative, Bidder shall commit to providing Project-Specific training, man-hour, budget, skill development and understudy plan for Nigerian personnel utilising OGTAN registered trainer(s) or other approved NCDMB training institution (s).

(7) Provide evidence of domiciliation of project management and procurement centers in Nigeria with physical addresses (not P.O. Box).

(8) Provide detailed description of the location of in-country facilities (Equipment, storage, workshops, repair, maintenance and testing facilities.

(9) Provide detailed statement with evidence of how it intends to maximize the use of Nigerian made goods and services.

(10) Provide details on any other Nigerian Content initiative the company is involved in.

(5) CLOSING DATE
Only Tenderers who are registered with NJQS Product Group 3.05.01 Steel /.Piping / Mechanical Services and 3.05.12 Pipe fitting and Welding Services, as at 4pm on 25 July 2023 being the advert closing time/date shall be invited to submit Technical and Commercial Bids.

(6) GENERAL CONDITIONS

  • Please note that all interested Contractors are required to strictly adhere to the following conditions in relation to their response to this Advert.
  • All costs incurred in preparing and processing NJQS pre-qualification and responding to this Tender Opportunity shall be to the Contractor’s own account.
  • This Advert shall neither be construed as any form of commitment on the part of HHOG to award any contract to any Contractor and or associated contractors, sub-contractors or agents, nor shall it entitle pre-qualified Contractors to make any claims whatsoever, and/or seek any indemnity from HHOG and/or any of its partners by virtue of such Contractors having been pre-qualified in NJQS.
  • The tendering process shall be undertaken in accordance with the NNPC contracting process which requires pre-qualified Contractors to submit their documentation in the following manner:-

-Pre-Qualified contractors in the relevant Services category in NJQS will be requested to submit their Technical and Commercial Tenders at the same time. Double Envelope Tender (DET).

-Following the Technical evaluation process, only technically acceptable and financially qualified contractors will have their Commercial Tenders opened and evaluated.

HHOG will communicate only with authorized officers of the qualifying Contractors at each stage of the Tender process as necessary and will NOT communicate through individuals or appointed Agents.

ES/NCDMB/HHOG/ADV/IPPG/111122/PROVISION OF FACILITIES MODIFICATION