DEADLINE: 6TH SEPTEMBER, 2023
ESSO EXPLORATION AND PRODUCTION NIGERIA LIMITED
(EXXONMOBIL SUBSIDIARIES)
OPERATOR OF OML 139, 154 DEEP WATER BLOCKS
INVITATION TO TENDER FOR THE PROVISION OF SUBSEA WELLHEAD SYSTEMS AND INSTALLATION SERVICES
NipeX Number: ESSO.00000112
(1) INTRODUCTION
Esso Exploration and Production Nigeria (Deep Water Ventures) Limited (EEPN (DWV)L), operator of NNPC OML 139 and Esso Exploration and Production Nigeria (Upstream) Limited (EEPN(U)L), operator of OML 154, collectively referred to as “Esso” plans to engage competent and qualified Companies to provide Subsea Wellhead Systems and Installation Services required for drilling operations on its NNPC/Esso PSC acreages.
Anticipated contract term is three (3) years with additional two (2) years optional period.
(2) SCOPE OF WORK
The scope of work involves the provision of subsea wellhead (HPWHH & LPWHH pairs) assemblies, fabrication of the 36″ structural pipe and subsea wellhead extension joints, installation tools, consumables (hangers, pack-offs, seals), personnel and services that comply with Company’s and relevant industry standards and procedures for subsea wells in 600m – 1800m water depth. Typical stickup heights of the top of the high-pressure wellhead housing (HP WHD HSG) will be 2m to 4m above the mud line. Drilling and Completion work to be performed from Mobile Offshore Drilling Unit (MODU) utilizing subsea trees (enhanced vertical). Provision for anti-rotation capability will be required for use of a dynamically positioned (DP) MODU. Produced medium shall be oil and gas with associated produced water.
All wellhead equipment specifications shall be consistent with Company’s 10,000 psi system, H2S, design requirements, shall have a minimum system bending capacity of 4.0 million ft-lbs, and tension capacity (at top of HP WHD HSG) of 2.0 million lbs (Contractor shall re-confirm riser loads, values prior to manufacturing).
(3) MANDATORY REQUIREMENTS
(a) To be eligible for this tender exercise, interested Tenderers are required to be prequalified and have LIVE status in the 1.01.07 (Wellhead Equipment, Xmas Trees and Accessories) and 3.04.19 (Wellhead Services) categories in NipeX Joint Qualification Scheme (NJQS) database. All successfully pre-qualified suppliers in this category will receive Invitation to Tender (ITT).
(b) To determine if you are prequalified and view the product/service category you are listed for: Open http://vendors.nipex-ng.com and access NJQS with your log in details, click on continue Joint Qualification scheme tool, click check “my supplier status” and then click supplier product group.
(c) if you are not listed in this product/service category and you are registered with NUPRC, please contact NipeX office at No.8 Bayo Kuku Street, Ikoyi Lagos with your NUPRC certificate as evidence for verification and necessary update.
(d) To initiate the JQS pre-qualification process, access www.nipex-ng.com to download application form, make necessary payments and contact NipeX office for further action.
(e) To be eligible, all tenders must comply with the Nigeria Content requirements in the NipeX system
(4) NIGERIAN CONTENT REQUIREMENTS
Company is committed to the development of the Nigerian Oil and Gas business in compliance with the Nigerian Oil and Gas Industry Content Development Act 2010 (NOGICD Act) enacted by the Federal Government of Nigeria in April 2010.
As from the commencement of this Act, the minimum Nigerian Content in any project, service or product specification to be executed in the Nigerian Oil and Gas Industry shall be consistent with the level set in the Schedule to the Act and any other targets as may be directed by the Nigerian Content Development and Monitoring Board (NCDMB)
NNPC/EEPNL PSC requires their Contractors to comply with the Act, its attached Schedule and any applicable regulation developed by the NCDMB.
Nigerian Content (NC) in the Nigerian Oil and Gas Industry is defined as:
“The quantum of composite value added to or created in the Nigerian economy by a systematic development of capacity and capabilities through the deliberate utilization of Nigerian human, material resources and services in the Nigerian Oil and Gas Industry”
“Nigerian Company” is a company formed and registered in Nigeria in accordance with the provisions of Companies and Allied Matters Act with not less tan 51% equity shares by Nigerian.
Tenderers shall consider Nigerian content as an important element of their overall project development and management philosophy for project execution.
As part of their technical tender submissions, prequalified Tenderers shall:
(a) Demonstrate that entity is a Nigerian registered company. Submit certified true copies of CAC forms 10, 02 & 07. Tenderer shall provide evidence of registration on NOGIC JQS and NUPRC certificate.
(b) Tenderer shall provide evidence of Category 1, 2, 3, 4 or 5 Services and Support (SS) group NCEC, to demonstrate capacity and capability in executing the work scope.
(c) Provide evidence of what percentage of your key management positions is held by Nigerians and what percentage of the total work force are Nigerians. Also, show overall percentage of work to be performed in Nigeria and those by Nigerian resources relative to total work volume.
(d) Tenderer shall comply with the latest approved version of NCDMB HCD guideline by committing (via a letter of undertaking) to providing Project-Specific training, man-hour, budget, skill development and understudy plan for Nigerian personnel utilizing OGTAN registered trainer(s) or other approved NCDMB training institution(s).
(e) Tenderer shall provide Location of in-country facilities (not limited to administrative office) to execute the work scope
Tenderer’s failure to comply with the NOGICD Act or demonstrate commitment to Nigerian Content development will result in Tenderer’s disqualification.
(5) CLOSING DATE
Only Tenderers who are registered and have LIVE status in the 1.01.07 (Wellhead Equipment, Xmas Trees and Accessories) and 3.04.19 (Wellhead Services) categories in NipeX Joint Qualification Scheme (NJQS) database as at 1600hours on September 6, 2023, being the advert closing date, shall be invited to submit Technical Bids.
(6) ADDITIONAL INFORMATION
(a) Interested suppliers must be product/service category in NJQS
(b) Full tendering procedure will be provided only to contractors that have been successfully prequalified in NJQS
(c) This advertisement shall neither be construed as an Invitation to Tender (ITT) nor a commitment on the part of Esso to award a contract to any supplier and/or associated companies, subcontractors or agents
(d) This advertisement shall not entitle prequalified companies to make any claims whatsoever, and/or seek any indemnity from Esso and/or its partners by virtue of such companies having been prequalified in NJQS
(e) All costs incurred in registering and prequalifying for this and other product/service categories in NJQS shall be borne solely by suppliers.
(f) Suppliers that are prequalified for this product/service category m NJQS must ensure that their names and contact details (physical address, email address and telephone number) of their company and authorized/responsible personnel is up-to-date in their company profile in the NJQS database
(g) Esso shall communicate only with the authorized/responsible personnel of prequalified companies and not through unauthorized individuals or agents.
NCDMB CERTIFICATION: NCDMB/EEPNL/ADV/UPD/230223/PROVISION OF SUBSEA WELLHEAD SYSTEMS AND INSTALLATIONS SERVICES
Mobil House, 1 Lekki Expressway, Victoria Island, P.M.B. 12054, Lagos Nigeria
