DEADLINE: 16TH AUGUST, 2024
CHEVRON NIGERIA LIMITED (CNL)
OPERATOR OF THE NNPCL/CHEVRON JOINT VENTURE
INVITATION TO TENDER FOR PROVISION OF CASING AND TUBULAR RUNNING SERVICES
NIPEX TENDER NO.: CNL.00000289
1. INTRODUCTION:
Chevron Nigeria Limited (CNL) invites interested and prequalified service providers for this tender opportunity for the provision of casing and tubular running services to support offshore drilling and completion operations.
The proposed award strategy is multiple contracts of 5 years term with an option of 2 years extension.
2. SCOPE OF WORK:
Interested bidder must be able to provide the following as required for offshore casing and tubular running services:
- provide equipment running tools and personnel for running Oil Country Tubular Goods (OCTG) for casing, steel and chrome tubing.
- the equipment should include, but not limited to, Elevators, Spiders, Power Tongs for casing from 7” to 36’’ and for tubing form 2-3/8” to 7’, drill collars, handling equipment for 3-1/8” DC, 4-1/8” DC and 4-3/4” DC for deploying 4-1/2” screens: dies, drifts, safely clamps, center latch elevators, lift subs, hand slips, etc. the contractors must have dual equipment for running dual tubing strings.
- provide equipment for running multiple control lines and have the capability to perform torque turn computer monitoring and recording.
- other equipment that are required are hydraulic power units, diesel engine, complete w/hoses, spare hoses and services parts, bucking unit complete with hydraulic power unit and hydraulic power tongs range from 2-3/8” up to 20” plus minimum of two CAM systems complete with cables, turns encorder, load cells and quick-stab top drive casing fill-up tool to fit all sizes of casing filling tools and used to fill casing and establish circulation during casing running operations.
- supply a quality plan outlining procedures to ensure that Chevron receives equipment that has been properly prepared for utilization. Dedicated QA personnel will be supplied by bidder to ensure rigorous adherence to BIDDER’s Quality Plan. Quality Plan will define Shop Equipment required to Both Make-up and Test Completion Equipment.
3. MANDATORY TENDER REQUIREMENTS:
A. To be eligible for this tender exercise, interested bidders are required to be pre-qualified and ‘live’ in the 3.04.04 (casing/tubing running services) category in Nipex Joint Qualification System (NJQS) database. All successfully pre-qualified and ‘live’ bidders in this category by the bid close date of this advert will receive the Invitation To Tender (ITT).
B. To determine if you are pre-qualified and view the product/service category you are listed for: open www.vendors.nipex-ng.com and access NJQS with your log in details. Click on Products/Services tab to view your status and product codes.
C. If you are not listed in this product/service category you registered with NUPRC to do business, please contact Nipex office at 27b, oyinkan Abayomi drive, ikoyi Lagos with your NUPRC certificate as evidence for verification and necessary update.
D. To initiate the JQS pre-qualification process, please access www.nipex-ng.com, click on services tab followed by NJQS registration.
E. To be eligible, all interested bidders must comply with the Nigerian Content requirements in Nipex system.
4. NIGERIAN CONTENT REQUIREMENT:
Chevron Nigeria Limited is committed to the development of the Nigerian Oil and gas business in observance with Nigerian Oil and Gas Industry Content Development act 2010 (NOGICD Act) enacted by the Federal Government of Nigeria in April 2010.
Pursuant to enactment of the NOGICD Act, the minimum Nigerian Content in any project, service or product specification to be executed in the Nigerian Oil and Gas Industry shall be consistent with the level set in the schedule of the Act and any other target as may be directed by the Nigerian Content Development and Monitoring Board (NCDMB).
Contractors shall comply with the provisions of the NOGICD Act and all applicable regulations. Bidders that do not meet the Nigerian Content criterion will not be allowed to participate in next Tender Stage.
The following ate Nigerian Content requirements bidders are expected to comply with in their technical bid submission:
- Demonstrate that entity is a Nigerian registered company with 51% or more shareholding capacity. Tendered shall provide CO2 and CO7, registration on NOGIC JQS and NUPRC certificate.
- Detailed description of the location of in-country committed facilities & infrastructure (technical office, administrative space etc.) in Nigeria to support this contract.
- Provide evidence of what percentage of your key management positions is held by Nigerians and what percentage of the total work force are Nigerians.
- Tenderer shall provide evidence of category 1,2 or 3 services and support (SS) group NCEC demonstrating ownership of fabric maintenance equipment and/or capacity to deploy trained manpower to executed work scope.
- Tenderer shall comply with the latest approved version of NCDMB HCD guideline by committing (via a letter of undertaking) to providing project-Specific training, man-hour, budget, skill development and understudy plan for Nigerian personnel utilizing OGTAN registered trainer(s) or other approved NCDMB training institution(s).
5. CLOSE DATE:
Other bidders who are pre-qualified and ‘live’ with NJQS Product/Category code 3.04.04 (casing/tubing running service) by 16:00 hours, 16 August 2024 being the advert close date shall be invited to submit technical and commercial bid.
6. ADDITIONAL INFORMATION:
1. Suppliers eligible for this tender opportunity are expected to be pre-qualified and live In NJQS under the product/ services category
2. The invitation to tender (ITT) and any further processing NJQS prequalification shall be via Nipex.
3. All costs incurred by a bidder in preparing/processing NJQS prequalification and participating in this tendering process shall be to the bidder’s account.
4. This advertisement shall neither be construed as any form of commitment on the part of chevron Nigeria Limited to award ant contract to any company and or associated companies, sub-contractors, or agents nor shall it entitle prequalified companies to make any claims whatsoever, and/or seek any indemnity form Company and/or any of its partners by virtue of such companies having been prequalified in NJQS.
5. Meet the requirement of casing and tubular running Services.
6. The tendering process shall be the NNPC Limited contracting process requiring pre-qualified companies to submit technical tenders first. Following a technical reviews, only technically and financially qualified contractors will be requested to submit commercial tenders
7. Company reserves the right to reject any and or all pre-qualified bids at its sole discretion and at no cost to company.
8. Company will communicate only with authorized officers of the pre-qualify companies and not through individual or agents.
ES/NCDMB/SDWPL/ADV/UPD/030724/PROVISION OF CASING AND TUBULAR RUNNING SERVICES
