DEADLINE: 05/04/2026 12:00:00 PM WAT
ADAMAWA STATE MINISTRY OF WORKS
CONTRACT FOR THE DUALIZATION OF JIMETA BYPASS FROM MAI DOKI ROUNDABOUT TO JIMETA BRIDGE (5.0KM)
ADSMOW/2026/WORKS/PROJ/001B
ADVERTISEMENT TO TENDER FOR ADAMAWA STATE MINISTRY OF WORKS AND ENERGY DEVELOPMENT, YOLA.
ADDRESS: STATE SECRETARIAT COMPLEX YOLA ROAD-JIMETA YOLA P.M.B 2024
Introduction
The Adamawa state Ministry of Works and Energy Development wishes to inform all eligible and interested contractors, suppliers and the General public that the Ministry is advertising to undertake procurement for the Dualization of Jimeta Bypass Road from Mai Doki Roundabout to Jimeta Bridge(5.0km) as provided by Adamawa State Bureau of Public Procurement in line with section 8 sub-section 1 (i) of the state public procurement Law of 2020.
Scope of the project
Firms/contractors are to submit Technical and financial bids for the Procurement for the Dualization of Jimeta Bypass Road from Mai Doki Roundabout to Jimeta Bridge (5.0km) and has the scope as follows:
The Scope of works include but not limited to the Following:
The project consists of the Reconstruction and Rehabilitation of 5km length of Dual carriageway road, with Shoulders 2.75m width on both sides.
The detail scope consists but not limited to the following: –
(1) Clearing of existing road to the limit of construction.
(2) Scarification of existing Asphalt
(3) Removal of Unsuitable materials to spoil.
(4) Provision of Boulders at the foundation of the embankment of the riverside.
(5) Provision of laterite fill along the road.
(6) Provision of Crossing and Access Box culverts of various sizes at different locations.
(7) Provision of reinforced concrete line drain with access slabs of various sizes on both sides at designated location.
(8) Provision of lean concrete as protection.
(9) Provision of Retaining wall of various sizes.
(10) Provision of 150mm thick laterite sub-base.
(11) Provision of 150mm thick Stone-base, on the carriageway and shoulder.
(12) Application of bituminous MC1 prime Coat.
(13) Provide and lay asphalt binder course to a compacted thickness of 60mm, on the carriageway and shoulder.
(14) Provide and lay asphalt wearing course to a compacted thickness of 40mm, on carriageway only.
(15) Provide and place Median concrete crash barrier.
(16) Provision of service lanes, length 1km
(17) Provide U-turns in specified locations.
(18) Provide of 2 Roundabouts at designated locations.
(19) Provision of Kerbs stone at Culverts and high embankment locations.
(20) Provision of Guard rails at high embankment.
(21) Road markings and signages.
(22) Removal of trees.
Eligibility:
Please Note; that the bids documents will be evaluated on the responsiveness to the following criteria;
- Shall be incorporated in Nigeria and have all the legal requirement incorporate in the country – including registration with relevant bodies which include
- Certificate of Registration with Corporate Affairs Commission.
- Registration as Contractor/Service provider in Adamawa State with Bureau of Public Procurement Valid 31st December, 2026.
- Evidence of VAT Registration and Remittance with TIN
- Copies of immediate past 3 years Tax clearance certificate (2024,2025 and 2026)
- Evidence of immediate past 3 years of company’s audited report (2023,2024 and 2025)
- Evidence of compliance with ITF amendment Act 2011 by inclusion of certificate of compliance from the Industrial Training Fund valid till 31st December, 2026
- Evidence of compliance with Pension Reform Act 2004 by inclusion of Certificate of compliance from the National Pension Commission valid till 31st December, 2026.
- Evidence of compliance certificate with Employees Compensation Act (ECA) 2010 (Registration with NSITF) valid till 31st December, 2026
- Must have capability, to commence work without advance payment to the satisfaction of the client.
- Bidders shall also submit proposals of work methods and schedule insufficient detail to demonstrate the adequacy of the bidders’ proposals to meet the technical specifications and the completion time.
- Ownership of quarry and asphalt plants in the state are key requirements or commitment letter from owners of quarry/asphalt plant for supply of gravels/asphalt
- All submissions in response to this advert should be in English language.
- Bids must be duly signed.
- Contractors must be fully mobilized in the State
- Evidence of similar Jobs carried out
- A sworn affidavit certifying as follows:
- That none of the Directors of the company seeking for pre-qualification/financial has ever been convicted by any court of law or declared bankrupt.
- Must attach sworn affidavit authorizing the signatory of the bid to commit the bidder
- That none of the officers of the Adamawa State Ministry of works/Adamawa State Bureau of Public Procurement is/are former or present Director of the company.
- All documents for submission must be transmitted with a covering/forwarding letter under the company/firms’ letter Head paper bearing amongst others, the registration number (RC) as issued by the corporate Affairs Commission (CAC), contact address and Telephone Number (preferably GSM No.) and E-mail Address.
Collection of Tender Documents
Interested and qualified companies should collect/ liaise with the Procurement Section of the Adamawa State Ministry of works Yola and obtained registration document on a deposit of a non-refundable fee of N1,000, 000.00 (One Million Naira) Only per bid for the Dualization of Jimeta Bypass Road from Mai Doki Roundabout to Jimeta Bridge (5.0km) Payment is to be made to the Ministry of works and Energy Development Bank Account with the following details.
- BANK NAME: ECOBANK, YOLA BRANCH
- ACCOUNT NAME: MINISTRY OF WORKS (PROJECT ACCOUNT)
- ACCOUNT NO.: 2603000778
Monday to Friday from 8:00am to 4:30pm
Submission of completed Documents
Prospective bidders are to upload their completed document of both Technical and Financial bids packaged through: saas. bidding/adsbpp.com not later than 04 May, 2026 by 12:00 noon of the submission dateline.
Must enclose a bid security – minimum of 3% of the quoted price of the project. Addressed to, the permanent secretary, Ministry of Works and Energy Development, Adamawa State Secretariat Complex Lamido Aliyu way, Yola.
Failure to upload at the said time will find himself to be blame as the portal will be closed at exact deadline and will not open again.
Opening of Bids
The Financial bids will be opened immediately after the dateline for submission (Two weeks from date of advertisement) at 12:00 noon on the 04 May, 2026. at the Ministry of Works and Energy Development conference Hall in the presence of bidders or their representatives while the technical bids will be kept un-opened. Please be sure to sign the bid submission register in the Hall during the bids opening.
PLEASE NOTE:
- Bidders are advised to inspect the project sites, the scopes of works and the blank Bill of Engineering Measurement and Evaluation (BEME) accompanying it, so as to avoid discrepancies in understanding of the project.
- Note that the process is not bound to consider the lowest bidder.
- Submit their works plan and methodology.
- Submit bids and all relevant document with the tittle of project be clearly written at the back as Dualization of Jimeta Bypass Road from Mai Doki Roundabout to Jimeta Bridge (5.0km) in Jimeta Metropolitan Addressed to the,
Permanent Secretary,
Ministry of Works & Energy Development,
Secretariat Complex, Lamido Aliyu way, Yola-Adamawa State.
- Bids must be in English language and signed by an official authorized by the Bidder.
- Bids submitted after the dead-line for the submission would not be received as the portal will be close and you cannot be open again.
- Nothing in this advertisement shall be considered a commitment on the part of ADS/MOW, nor shall it entitle responding firms to seek any indemnity from ADS/MOW. ADS/MOW is not bound to pre-qualify any bidder and reserve the right to annul the Procurement process at any time without incurring any liabilities in line with the provisions of the Adamawa State Public Procurement Law, 2020.
- This advertisement is an invitation to CSO’s (observers) to participate. This advertisement can be accessed on website at: www.binddingo.com/adsbpp
For enquiries, please contact the Head of Procurement on Mobile No.08036146360.
Signed:
MANAGEMENT
