Eroton Exploration & Production Company Limited - Tender Opportunity For The Provision Of Pipeline Pigging And Corrosion Control Services In OML18

EROTON EXPLORATION & PRODUCTION COMPANY LIMITED OPERATOR OF THE OML .18 ASSET TENDER OPPORTUNITY FOR THE PROVISION OF PIPELINE PIGGING AND CORROSION CONTROL SERVICES IN OML18 (EEP19-0129) NIPEX TENDER NUMBER: 1000004494

1. INTRODUCTION EROTON E & P Company Limited, the operator of NNPC/Eroton JV invites interested and reputable contractors with suitable equipment and relevant experience to tender for the provision of pipeline pigging and corrosion control services in OML 18. The objective is to ensure integrity of the pipeline system and compliance with statutory requirements.

2. SCOPE OF WORK The Service includes the provision of personnel and equipment required for the execution of pipeline pigging and corrosion control services in OML18 swamp Nigeria or any other additional Permit Area in which COMPANY has the right to conduct petroleum operations within Nigeria. The contractor shall be responsible for the provision of the following:

• Routine Pigging for removal of Sand, dewaxing, and descaling. This pigging will clean up the pipeline bore and thereby increase the volume of crude that is transported. It will also ease the pressure on the pumps in the flow stations. • Intelligent Pigging for identification of defects that will affect the capacity and integrity of the pipeline. • Electronic Gauging or Caliper Pigging required to identify bends or restrictions in the pipeline • Defect assessment and analysis. • Long Range Ultrasonic Testing (LRUT) • Corrosion control services by injection of Corrosion Inhibitors or Biocides into the system. • Six monthly valves servicing of valves on the pipelines. The contract duration shall be for a period of two (2) firm years plus one (1) year optional extension.

3. MANDATORY REQUIREMENTS • To be eligible for this tender exercise, interested contractors are required to be pre- qualified in the 3.07.02 Pipeline Flushing, External/lnternal, Pigging services category of the NipeX Joint Qualification (NJQS) Database. All successfully pre- qualified suppliers in this category will receive Invitation to Tender (ITT). • To determine if You are pre-qualified and view the product/service category you are listed for : open, http://vendors.nipex-ng.com and access NJQS with your log in details, Click on Products/Service Status tab view your status and product codes • If you are not listed in a product/service category and you are registered with DPR to do business, contact NipeX office at 8, Bayo Kuku Street, Ikoyi Lagos with your DPR certificate as evidence for verification and necessary update. • To initiate the JQS pre-qualification process, access nipex-ng.com click on services tab followed by NJQS registration. • To be eligible, all tenderers must comply with the requirements of the Nigerian Oil and Gas industry Content Development Act, 2010. Noncompliance shall result in disqualification from bidding for this opportunity.

4. CLOSING DATE • Only Tenderers who are registered with NJQS Product/category (3.07.02 Pipeline flushing, External/lnternal, Pigging service) as at April 24, 2020 being the advert close date shall be invited to submit bids (Technical and Commercial).

5. NIGERIAN CONTENT Bidders are to note that they will be requested during the technical tender to give full detail of their relevant strategy to ensure that they fully comply with provisions of the Nigerian Oil and Gas Industry Content Development (NOGICD) Act 2010. Consequently, bidders’ submissions shall be evaluated strictly with the minimum evaluation criteria defined in The Act, Failure to meet the Nigerian Content requirements is a “FATAL FLAW” In line with the above, Tenderers responding to this advertisement are required to submit the following in compliance with the Nigerian Content Act 2010: (1) Demonstrate that the entity is a Nigerian-registered/owned company. Submission of certified true copies of CAC forms 10, 92 & 07 for its equivalent: CAC 23, 24, 25 etc) including company memorandum & article of association and other evidence of entity’s incorporation, shareholding & ownership structure in Nigeria. (2) Develop a Nigerian Content Plan that demonstrates the full utilization of Nigerian Labour and services with detailed description of role, work scope and man-hours in order to achieve the minimum target as set out in the requirements of the NOGICD Act 2010 (85% Man-hour: Pipeline Flushing, External/Internal inspection, Pigging Services) for this project. Where in-country capacity is inadequate proposed innovations to bridge the gap. (3) A plan of how it intends to give first consideration to material manufactured as well as assembled goods of Nigerian origin which shall include a materials and consumables to be utilized and identifying those that are found locally, finished products and materials that will be procured from Nigerian manufacturing and assembly plants, finished goods that order can be placed from outside Nigeria through Nigerian authorized vendors and accredited agents and those that would be directly imported (4) Details of the company’s corporate organizations, overall human resources structure (management, supervisors, senior and junior skilled officers, etc), identifying positions manned/occupied by Nigerian nationals with evidence of type of employment in-country and identifying the positions manned/occupied by other nationals. (5) Where the bidding entity lacks capacity, genuine alliances with other Nigerian companies or multinational companies for the purpose of technology transfer shall be encouraged. The alliance/joint venture shall be executed with binding Memorandum of Agreement (MOA) signed by chief executives of both entities stating clear work- share ratio among the parties and time frame for growth or transfer to be achieved. (6) A detailed description of the location of in-country committed facilities and infrastructure (assets, equipment, technical office, administrative space, storage etc) in Nigeria to support this contract. (7) Tenderers to submit a detailed training plan which shall provide sustainable training and development (including certification as applicable) for Nigerians in line with the Human Capacity Development Initiative Guideline of the Nigerian Content Development and Monitoring Board’s (NCDMB). The training plan will include contract-specific training and estimated man-hours. Tenderer is required to submit MOA with Oil and Gas Trainers Association of Nigeria (OGTAN) trainers to support their training plan, which shall be 15% of the project Man-hours or 3% of the total contract sum. (8) Provide evidence to show that a minimum of 50% of the equipment to be deployed for the work is owned by the Nigerian subsidiary if international or multinational company is working through the Nigerian subsidiary including equipment list (Tenderer to provide verifiable evidence (purchase receipt bill of safe etc) of ownership of equipment in executing this contract. (9) Provide evidence of approved Nigerian Content Equipment Certificate or status of the application submitted to NCDMB for the certificate for the procurement of all equipment, systems and packages to be supplied on the contract (where applicable). Where Tenderer intends to use subcontractor(s)/supplier(s), Tenderer shall provide same information for the nominated supplier(s)/sub-contractor(s). (10) All bidders for a project/contract/service with a completion period of 12 months or more are required to submit as part of the Nigerian Content requirement a signed Memorandum of Agreement (MOA) between it and one of the research and development (R&D) Clusters established by the Nigerian Content Development and Monitoring Board (NCDMB). The MOA shall be relevant to the project and shall indicate how the bidder intends to use the relevant R&D Clusters during project execution’ (11) Detailed specific programmes in place to transfer technology and skills to Nigerian businesses (12) Provide evidence of completed registration on NCDMB NOGICD JQS portal Note: Land and Swamp operations are exclusively for Nigerian indigenous service companies that have a minimum of 51%equity shareholding.

6. ADDITIONAL INFORMATION • Interested suppliers must be pre-qualified for this product/service category in NJQS. • Full tendering procedure will be provided only to contractors that have been successfully pre-qualified in NJQS. • This advertisement shall not be construed as a commitment on the part of EROTON to award a contract to any supplier and/or associated companies, subcontractors or agents. • This advertisement shall not entitle pre-qualified companies to make any claims whatsoever and/ or seek any indemnity from EROTON and/ or its partners by virtue of such companies having been pre-qualified in NJQS. • All costs incurred in registering and pre-qualifying for this and other products/ services categories in NJQS shall be borne solely by suppliers. • Suppliers that are pre-qualified for this product/service category in NJQS must ensure that the name and contact details (physical address, email address and telephone numbers) of their company and authorised/responsible personnel is up to date in their company profile in the NJQS data base. • EROTON shall communicate only with the authorised/responsible personnel of Dis-qualified companies and not through unauthorised individuals or agents.

Please visit NipeX portal at www.nipex-ng.com for this advert and other information. ES/NCDMB/EROTON- ADVERT/0309/1900/MID/PROVISION OF PIPELINE PIGGING AND CORROSION CONTROL SERVICES

Eroton Exploration & Production Company Limited – Tender Opportunity For The Provision Of Pipeline Pigging And Corrosion Control Services In OML18

POPULAR

How to Check for your Individual TIN (Tax Identification Number) Online

Download List of NGO/Government Tenders with June 2022 Deadlines

How to Check Your Ikeja Electric (IKEDC) E-bills Online

United Nations Development Programme (UNDP)- Request For Quotation For Supply Of 40,000 Litres Of Diesel (AGO) For UN House Generators

United Nations Development Programme (UNDP)- Request For Quotation For The Procurement Of Specialized Desktop And Accessories For UNDSS ID Card And Pass Unit

Welcome Back!

Create New Account!

Retrieve your password