CHEVRON NIGERIA LIMITED
OPERATOR OF THE NNPC/CHEVRON JOINT VENTURE
TENDER OPPORTUNITY
PROVISION OF WIRELINE LOGGING SERVICES TO SUPPORT JV DRILLING AND COMPLETIONS OPERATIONS
NIPEX TENDER NO: CNL.00000182
INTRODUCTION:
Chevron Nigeria Limited, Operator of NNPC/CNL Joint Venture, invites interested and prequalified companies for this tender opportunity for the Provision of Wireline Logging Services to support Drilling, Completions and Workovers for JV Operations in Nigeria in 2020-2022.
The contract is proposed to span a period of two (2) years with a possible optional term of one (1) year duration
SCOPE OF WORK:
The scope of work for the services includes but not limited to the following:
• Packages of latest technology open hole and cased hole wireline logging units and tools for oil and water base mud systems inclusive of high pressure and temperature tools for 6 to 17-1/2″ hole sizes.
• Packages of latest technology in open hole and cased hole wireline logging units and tools for oil and water base mud systems inclusive of high pressure and temperature tools for 6″ to 17-1/2″ holes sizes.
• Packages of latest technology Logging tools, inclusive of spectral gamma ray, elemental composition logging, high resolution array resistivities, neutron, density, multi-pole sonic, borehole imaging. Nuclear Magnetic Resonance logging, wire line coring and Vertical Seismic Profiling. Must have capability to collect formation pressure, fluid sampling tools and multiple PVT quality samples.
• Packages of the latest technology wire line tools for cased hole operations inclusive of gamma ray, neutron, and collar locator depth correlation: gamma ray rated for perforating and packer setting service; packer setting tools: bridge plugs for tubing & casing sizes from 2-7/8″ thru 4-1/2″; perforating guns with charge and gun system performance as per API RP 43 5th Edition Section I procedures for hole punch, big hole and deep penetrating charges for tubing and casing sizes from 2-7/8″ thru 9-5/8″: and chemical and explosive jet cutters for tubing sizes from 2-7/8″ thru 4 1/2″. The complete production logging tool string including sigma and oil saturation from elemental spectral stripping techniques. A complete set of cement evaluation devices, including a slim hole kit for through tubing applications
• Hardware and software to transmit real time directly to COMPANY Lekki Office and Port Harcourt Onne Port bases. The COMPANY shall provide the data link between the rig-site and the remote locations: CONTRACTOR shall provide the hardware and software.
• Wireline Service Coordinators) for supervising the CONTRACTOR’s field operations at COMPANY bases in Lekki and or Port Harcourt/Onne Port. Duties shall be inclusive of directing the movements of logging tools supervising personnel as required for the field-based operations. In addition, he shall be required to recommend and plan the execution of all cased hole wireline operations and consult with COMPANY personnel during operations to design such programs as may be directed by the company The Wireline Service Coordinator must be an expert in logging operations with at least 5 years’ experience specific to Wireline logging.
• Senior Logging engineers with a minimum of 7 years’ experience of which 2 of the past 5 years are associated with offshore wells. Wireline Operators with a minimum 7 years’ experience, at least 2 years of which associated with offshore wells.
• Ability to construct a Wireline Service Shop at COMPANY base in Port Harcourt/Onne Port for performing detailed electronics checks and routine servicing of logging tools.
• Full Time Lagos-based Wireline Technical Services Representatives: experts in well logging operations with a minimum of ten (10) years logging experience required to consult with COMPANY personnel during operations to design and execute well logging program as per COMPANY direction.
• Dedicated Wireline Tool Maintenance Technicians to redress: maintain Wireline tools kept in Port Harcourt and Onne
• Complete listing and specifications of CONTRACTOR-owned Wireline equipment currently available in Nigeria. List to include:
• Types, sizes and dimensions of logging units, complete inventory of all CONTRACTOR’s Wireline logging supplies, equipment and tools.
• Open hole PVT well site acquisition and validation services
MANDATORY TENDER REQUIREMENTS:
A. To be eligible for this tender exercise, interested contractors are required to be pre-qualified and ‘live’ in the 3.04.09 (Electrical Logging/Calibration Services) category in Nipex Joint Qualification System (JQS) database. All successfully pre-qualified and ‘live suppliers in this category by the bid close date will receive Invitation to Technical Tender (ITT).
B. To confirm if you are pre-qualified and view the product service category you are listed for: Open http://vendors.nipexjqs.com and access NJQS with your log in details. Click on Products/Services tab to view your status and product codes
C. If you are not listed in this product/service category and you are registered with DPR to do business for this category, please contact Nipex office at 8-10, Kuku Street. Ikoyi Lagos with your DPR certificate as evidence for verification and necessary update.
D. To initiate the JOS prequalification process, please access www.nipex-ng.com. click on services tab followed by NJQS registration
E. To Be Eligible, all tensors must comply with the Nigerian Content requirements in the NipeX system.
NIGERIAN CONTENT:
Chevron Nigeria Limited is committed to the development of the Nigerian Oil and Gas business in compliance with the Nigerian Oil and Gas Industry Content Development Act 2010 (NOGICD Act) enacted by the Federal Government Of Nigeria in April 2010.
Pursuant to enactment of the NOGICD Act, the minimum Nigerian Content in any project, service or product specification to be executed in the Nigerian Oil and Gas Industry shall be consistent with the level set in the schedule of the Act and any other target as may be directed by the Nigerian Content Development and Monitoring Board (NCDMB).
Contractors shall comply with the provisions of the NOGICD Act and all applicable regulations. Bidders that do not meet the Nigerian Content criterion will not be allowed to participate in Dexter Tender Stage
The following are the Nigerian Content requirements bidders are expected to comply with in the air technical bid submission
A.
Demonstrate that the entity is a Nigeria Registered Company, or a
Nigeria Registered Company in genuine alliance or joint venture with a
foreign company with details on scope and responsibilities of parties
for this work Such companies must show evidence of joint venture binding
agreement duly signed by the CEOs of both companies including evidence
or plans of physical operational presence and set up in Nigeria
B. Furnish details of company ownership and shareholding structure. Also submit clear photocopies of your CAC Forms CO2 and CO7
C. Provide evidence of the percentage of 1) key management positions
that are held by Nigerians and 2) total work force that are Nigerians.
Also, show overall percentage of work to be performed by Nigerian
resources relative to total work volume.
D. Provide a Nigerian
Content Plan with a detailed description of the role work scope,
man-hours and responsibilities of all Nigerian companies and personnel
that will be involved in executing the work. Also provide details of
Nigerian Content contact or manager
E. State proposed total scope of
work to be performed by Nigerian personnel (whether contracted directly
or under subcontract agreements with names and addresses including
evidences of well-equipped offices and workshop attach past experience
of such patronage.
F. Specific to this project, provide detailed
plan for staff training and development on engineering project
management and procurement (including all software to be used, number of
personnel, name of organization providing such training and evidence of
past training record) for Nigerian personnel including description of
any specific programs in place for transfer of technology and skills to
indigenous businesses and Nigerians over the next five (5) years.
G.
Provide evidence of domiciliation of project management and procurement
centers in Nigeria with physical addresses (not PO Box).
H.
Location of in-country facilities, (Equipment, storage, workshops,
repair & maintenance facilities and testing facilities).
I. Contractor must be willing and able to provide evidence of maximization of made in Nigeria goods and services.
J. Provide details on any other Nigerian Content initiative your company is involved in.
K. Provide evidence of MOU with OGTAN registered trainer to conduct classroom module of training and on the job attachment.
L. Provide human capacity building development plan including budget
which must be minimum 10% of project man-hours or cost. Training will be
targeted at developing capacity other than bidders’ personnel. Trainees
will be nominated from a database maintained by NCDMB and the services
of OGTAN registered trainers utilized to cover classroom modules.
M. Provide details of equipment ownership
N. Bidders (vendors, original equipment, manufacturers-OEMs, and EPC
Contractors0 are required to present Nigerian Content Equipment
Certificate (NCEC) issued by Nigerian Content Development and Monitoring
Board (or evidence of application for the certificate) in respect of
any components, spares, equipment, systems and packages to be used in
the proposed project under tender.
CLOSING DATE
Only tenderers who are pre-qualified and ‘Live’ with NJQS Product/Category 3.04.09 (Eletrical Logging/Calibration Services) by 16:00 Hours, Friday 20th, December, 2019 being the advert close date shall be invited to submit Technical Bids
ADDITIONAL INFORMATION:
1. Suppliers eligible for this tender opportunity are expected to be prequalified in NJQS under this product/service category.
2. The Invitation to Tender (ITT) and any further progression of this tender shall be via NipeX.
3. All costs incurred in preparing and processing NJQS prequalification shall be solely for the interested bidders’ accounts
4. This advertisement shall neither be construed as any form of commitment on the part of CNL to award any contract to any company and or associated companies, subcontractors or agents, nor shall it entitle prequalified companies to make any claims whatsoever, and/or seek any indemnity from CNL and or any of its partners or affiliates by virtue of such companies having been pre-qualified in NJQS.
5. The tendering process shall be the NNPC contracting process requiring pre-qualified companies to submit technical tenders first. Following a technical review, only technically and financially qualified bidders will be requested to submit commercial tenders.
6. CNL will communicate only with authorized officers of the pre-qualifying companies and NOT through individuals or Agents.
ES/NCDMB/CNL-ADVERT/2305/1900/UPD
Please visit Nipex portal at www.nipex-ng.com for this advert and other information.
Management
Chevron Nigeria Limited,
2 Chevron Drive, Lekki Peninsula,
P.M.B, 12825, Lagos
