THE SHELL PETROLEUM DEVELOPMENT COMPANY OF NIGERIA LIMITED
OPERATOR OF THE NNPC/SPDC/TEPNG/AGIP JOINT VENTURE
TENDER OPPORTUNITY: PROVISION OF ONE SPECIAL CAPABILITY
JACK UP RIG FOR HP/HT DRILLING AND WORKOVER OPERATIONS
TENDER REF: CW425908
NIPEX ID: SPDC.00000361
DEADLINE: 13TH OCTOBER, 2020
1.0 INTRODUCTION
SPDC hereby announces to interested and prequalified companies an upcoming tendering opportunity for the provision of one special capability jack up drilling and workover rig for SPDC. The proposed contract will commence in Q3,2021 and remain active for two years primary duration, followed by two one-year extension options
Please visit the Nigerian Petroleum Exchange Portal www.nipex-ng.com for
further details.
2.0 SCOPE OF WORK
Scope of work requires the provision of one special capability jack up drilling and workover rig operation service to support high pressure, high temperature (HP/HT) drilling, completions and well testing operations.
The rig is expected to have the following minimum technical specifications:
1. Constructed not more than 10 years ago (Condition survey shall be performed on rigs above 10years old by independent contractor)
2. Minimum variable deck lood (VD) rating: 4,500- 8,000 klbs
3. Depth rating of 25,000t with 5-1/2″ Drill Pipe.
4. Drawworks capacity of minimum 3000HP
5. Jackup system with 250fh minimum leg length available below hull
6. Transit water draft: 16ft; min/max operating water depth: 60ft/130f
7. Three mud pumps each roted 2200HP 7,500pai WP
8. 3x 45MT SWL cranes to API 2C specifications
9. Helicopter landing deck: Rated for S-92 helicopter(12.8MT) CAP 437 compliant with refuelling capability
10. Cantilever system: Minimum skidding distance 60t x 12t x 12ft with min load rating of 2,500klibs
11. Hookload capacity of 1,500,0001bs 12. Accommodation for 120 persons minimum (with catering services)
13. Top Drive System (TDS) with the following ratings capacity, 750T, 15000psi WP minimum continuous output torque of 62,000 f-lbs and preferably AC driven with Z-torque stick-slip mitigation system or equivalent
14. Solids control package consisting cuttings drier, centrifuge and augers with feed capacity of 35MT/hr
15. Provision of Automotive Gas Oil to operate all rig and ancillary equipment,
Company equipment, including Company’s third-party equipment
16. Minimum storage capacities:
a. mud tank capacity of 3,500bbl (with agitators) for active mud system
b. drill water of 2.000bbl;
c. potable water of 4,000bbl with 1500gal/day water maker
d. Fuel of 2,500bbl
17. Well control equipment must meet the requirements of API 16A for new
equipment and API 16AR for repaired/ remanufactured equipment. All flow-wetted pressure control equipment must have valid certificates of conformance from OEM
a. 13-5/8 (minimum bore) 15,000psi WP Class 5 BOP surface stack
b. 20 34 3000psi WP Class 2 BOP surface stack
c. 4-1/16 x 3-1/16x 15,000psi WP choke manifold.
d. 49 1/2 500psi WP diverter
18. Sewage treatment system (Red Fox or equivalent- Capacity 120 persons)
19. Domestic waste evacuation package
20. Solids control equipment including 4 x shale shakers, 1 x mud cleaner, 1x
centrifuge
21. 400MT vertical capacity 600mm stroke conductor tensioning system
22. Managed Pressure Drilling spread with rotating circulating device (RCD) and
ancillary surface equipment capable of delivering 1,500psi of surface pressure while drilling
23. Drilling Contractor and rig crew with demonstrable knowledge of HP/HT
drilling operations
24. Mud cooler (optional)
3.0 MANDATORY REQUIREMENTS
1. To be eligible for this tender exercise, interested contractors are required to be pre-qualified and LIVE in NJQS Product Category List 3.04.01 (Drilling Rigs) in NipeX Joint Qualification System (NJQS) database. All successfully pre- qualified suppliers in this category will receive an Invitation to Tender (ITT).
2. To determine if you are pre-qualified and view the product/service category you are more listed for: Open http://vendors.nipexjqs.com and access NJQS with your log in details. Click on Products/Services Status tob to view your status and product codes
3. If you are not listed in a product/service category you are registered with DPR to do business, contact NipeX office at 8/10 Boyo Kuku Street, lkoyi Lagos with your DPR certificate of evidence for verification and necessary update 4. To initiate the JQS pre-qualification process, access www.nipex-ng.com, click on services tab followed by NJQS registration.
5. To be eligible, all tenders must comply with the Nigerian Content requirements in the NipeX system.
4.0 NIGERIAN CONTENT REQUIREMENTS
Vendors are to demonstrate strict compliance with the provisions of Nigerian Oil & Gas Industry Content Development Act and also provide the following
requirements:
I.Bidder shall meet the following requirements
a. The bidding entity (supported by verifiable evidence) propose to deploy and
utilize for the service a nominated Nigerian-owned jack up drilling rig (providing
MOA for a rig owned by a Nigerian 3rd party) and/or
b. A Nigerian company (that has demonstrated Nigerian-equity ownership in a
land/swamp rig) is the bidding entity or is participating as a partner in the bidding entity, supported by evidence of MOA in the case of a joint bid. Including
submission of documented plan by the bidding entity (.e. with cash flow analysis
approved by a reputable Nigerian lending institution/bank) demonstrating at start
of contract planned acquisition of 10% Nigerian equity ownership of the
nominated drilling rig to be deployed and utilized for the service and increasing
to 50% Nigerian equity within the duration of the contract when successful os
preferred bidder and/or
c.Evidence of Nigerion partner owning significant marine assets to support
swomp or offshore drilling operations In addition to (o), or (b) or (c) above
d. Evidence of bidding entity demonstrating compliance in 55% targets for
Nigerian manning of key positions on the rig plus significant utilization of
in-country support services in the operations of rig while on contract
II. Provide evidence of company Ownership Structure form CO2 and CO7,
registration on NOGIC JaS ond DPR certificate
III. Detailed description of the location of in-country committed facilities &
infrastructure (Technical/ Administrative offices) in Nigeria to support this contract
IV In line with the NCD Human Capacity Development Initiative, Bidder sholl
commit to providing Project-Specific training, man-hour, budget, skill development and understudy plan for Nigerian personnel utilizing OGTAN registered trainer(s) or other approved NCDMB training institutions).
V Submit Tenderer’s corporate organizational and project/contract specific
organogram. CV’s of all personnel (rig manning minimum of 55% NC) listed in the project organogram should be submitted. For any position to be occupied by
expatriate, tenderer shall provide evidence to obtain expatriate quota approval
granted by NCDMB before any expatriate is deployed to execute this work scope
VI. First consideration shall be given fo Nigerian companies in sourcing for services In line with Section 49 and Schedule to the NOGICD Act 2010, bidders will be mandated to use the services of Nigerian banks, Insurance companies and Law firms for the execution of this contract. This shall form part of the requirements for the assessment of the bidders during the technical evaluation. Details of the banks, insurance companies and law firms will be clearly stated in the Nigerian Content Compliance Certificate to be completed by the winning bidder(s).
In addition, the following services will be subcontracted to Nigerian vendors:
a) Provision of managed pressure drilling (MPD) service
b) Provision of AGO
Rig inspection services
d)Certification and inspection of lifting equipment and temporary pipework
e) Catering services
f) Housekeeping services
5.0 CLOSING DATE
Only Tenderers who are registered in the NJQS product/ category as at 13th October, 2020 being the advert close date shall be invited to submit Technical bids
6.0 ADDITIONAL INFORMATION
All costs incurred in preparing and processing NUQS pre qualification shall be to the contractor’s accounts
This advertisement shall neither be construed as any form of commitment on the part of SPDC to award any contract to any company and or associated companies, sub-contractors or agents, nor shall it entitle prequalified companies to make any claims whatsoever, and/or seek any indemnity from SPDC ond or any of its partners by virtue of such companies having been prequalified in NJQS
SPDC will communicate only with authorized officers of the pre-qualifying
companies and NOT through individuals or Agents.
NCDMB CERTIFICATION NUMBER: NCDMB/PCAD/UPD/SPDC-ADV-0920/30126
