DEADLINE: 23RD DECEMBER, 2022
(MOBIL PRODUCING NIGERIA UNLIMITED
(AN EXXONMOBIL SUBSIDIARY
(OPERATOR OF THE NNPC LTD/MPN JOINT VENTURE
INVITATION TO TENDER FOR THE PROVISION OF FISHING AND TOOLS RENTAL SERVICES
NipeX Number: MPN.00000243
(1) INTRODUCTION
Mobil Producing Nigeria Unlimited (MPN) operator of the NNPC LTD/MPN Joint Venture (JV) plans to engage competent and qualified Companies to provide Fishing and Tools Rental Services for its development Drilling & Well work Program operations on its offshore location(s) in NNPC LTD/MPN JV acreages Anticipated contract term is two (2) years with an additional one (1) year optional period
(2) SCOPE OF WORK
The scope of work includes but is not limited to the provision of equipment, personnel and technical support for Fishing and Tools Rental Services when requested by Company
(1) Contractor shall supply Fishing and Tools Rental, equipment & tools to be utilized in hole sizes of 26″, 17-1/2″, 16″, 12-1/4″, 8-1/2″ and 6″ in casing (and tubing) sizes of 36″ x 2″ and 1.5″ wall thickness, 30″, 20” x 0.812″ and 0.625” wall thickness, 13-5/8″, 13-3/8”, 9-5/8″, 9-7/8″, 7″, 6-5/8″, 5- ½”, 4- ½”, 3-1/2”, 2-7/8” & 2-3/8”
(2) Fishing and Tools Rental equipment & tools shall include, but not be limited to: severing, back-offs, over-shots, releasing spears, mechanical drilling jars, hydraulic fishing bumper subs, hydraulic fishing jars, hydraulic jar intensifiers, hydraulic drilling jars, surface bumper jars, shock subs, junk mills, tapered mills, junk baskets, impression blocks, fishing magnets, safety joints, wash-pipes, section mills, water melon mills, pilot mills, internal/external hydraulic pipe cutters, whipstock and side track assemblies, casing patches, stabilizers, wellhead recovery system, lift subs, hole openers, casing scrapers, 3-1/2″ drill pipes, 4” drill pipes, 5″ drill pipes, 5-1/2” drill pipes, 5-7/8” drill pipes, 4-3/4″ drill collars, 6- 1/2” & 8” drill collars, cross-overs, safety valves, brushes and under-reamers etc.
(3) Contractor shall supply pilot milling tools & bottom hole assemblies for casing sizes from 7″ to 20″
(4) Contractor shall supply crossovers or adapters required to connect Contractor’s equipment and tools to Company or drilling unit equipment and tools
(5) The primary drilling string for the NNPC LTD / MPN JV wells will be 5-7/8” drill pipe with XT-57 connections.
(6) The contingency strings will be 5-1/2″ with HT-55 connections, 6-5/8″ 27.7ppf S-135 with XT-57 connections, 5” 19.5ppf S-135 with NC50 connections, 3-1/2″ 15.5ppf with NC38 connections and 2-3/8″ 6.65ppf S-135 Hydril WT23 connections
Note: All connections must be confirmed at Contract Award
(7) Contractor shall provide onshore make-up and break-out services (bucking/un-bucking) of Contractor’s equipment to API, proprietary and Company specifications when requested by Company.
(8) Contractor shall have adequate equipment and qualified personnel in Nigeria to provide services as specified for the Work offshore on jack-up drilling units. Adequate equipment shall include back-up equipment for use during periods of scheduled and unscheduled maintenance. Contractor’s staffing plan shall allow for scheduled and unscheduled “time off’ without affecting ongoing services for Company.
(9) Contractor shall provide to Company an adequate inventory list of equipment as requested by Company, which will also include spare parts, materials, consumables, etc. to ensure uninterrupted services for the life of the contract.
(10) Contractor shall provide Company a detailed program/procedure prior to the use of Contractor’s equipment.
(11) Contractor shall provide Company a comprehensive report for all services to Company within a reasonable period of time after completion of each service at no additional cost to Company. Reports shall be in both hard copy and electronic copy formats as specified by Company. Reporting requirements including but not limited to “content” and “submittal” requirements for all reports required (e.g.. Daily Rig Reports, End of Well Reports, etc.)
(12) Contractor shall provide Equipment calibration, certification, maintenance, and pre-job preparation record books (i.e., “Pre-Job Equipment Preparation and Inspection Data Books”) to provide objective evidence that all equipment and instruments meet specified requirements.
(13) Technical service support is required for all services pertaining to the supply, operation of the equipment and performance of services. Activities will include, but not be limited to, the following: testing, assembly, interface coordination, documentation, certification, logistics, customer property management, scheduling, routine progress reporting, QA/QC etc.
(3) MANDATORY REQUIREMENT
(a) To be eligible for this tender exercise, interested Tenderers are required to be prequalified and have LIVE status in the 1,01-06 (Fishing and Repair Tools) and 3.04.36 (Drilling Services) categories in NipeX Joint Qualification Scheme (NJQS) database. All successfully pre-qualified suppliers in this category will receive Invitation to Tender (ITT).
(b) To determine if you are prequalified and view the pro duct/service category you are listed for: Open http://vendors.nipex-ng.com and access NJQS with your log in details, click on continue Joint Qualification scheme tool, click check “my supplier status” and then click supplier product group.
(c) If you are not listed in this product/service category and you are registered with NUPRC, please contact NipeX office at No.8 Bayo Kuku Street, Ikoyi Lagos with your NUPRC certificate as evidence for verification and necessary update.
(d) To initiate the JQS pre-qualification process, access www.nipex-ng.com to download application form, make necessary payments and contact NipeX office for further action the NipeX system.
(4) NIGERIAN CONTENT
Company is committed to the development of the Nigerian Oil and Gas business in compliance with the Nigerian Oil and Gas Industry Content Development Act 2010 (NOGICD Act) enacted by the Federal Government of Nigeria in April 2010.
As from the commencement of this Act, the minimum Nigerian Content in any project, service or product specification to be executed in the Nigerian Oil and Gas Industry shall be consistent with the level set in the Schedule to the Act and any other targets as may be directed by the Nigerian Content Development and Monitoring Board (NCDMB).
NNPC LTD/MPN JV requires their Contractors to comply with the Act, its attached Schedule and any applicable regulation developed by the NCDMB.
Nigerian Content (NC) in the Nigerian oil and gas industry is defined as:
“The quantum of composite value added to or created in the Nigerian economy by a systematic development of capacity and capabilities through the deliberate utilization of Nigerian human, material resources and services in the Nigerian oil and gas industry.”
“Nigerian company” is a company formed and registered in Nigeria in accordance with the provisions of Companies and Allied Matters Act with not less than 51% equity shares by Nigerians.
Tenderers shall consider Nigerian content as an important element of their overall project development and management philosophy for project execution.
As part of their submissions, Tenderers shall:
(a) Demonstrate that entity is a Nigerian registered company. Submit certified true copies of CAC forms 10, 02 & 07 (or its equivalent; CAC 2.3, 2.4, 2.5, etc.) including company memorandum & article of association and/or evidence of entity’s incorporation, shareholding & ownership structure in Nigeria.
(b) Tenderer shall provide evidence of NCEC Category 1,2,3,4 or 5 under the Services and Support group (SS), to demonstrate capacity and capability in executing the work scope.
(c) Provide evidence of what percentage of your key management positions is held by Nigerians and what percentage of the total work force are Nigerians. Also, show overall percentage of work to be performed in Nigeria and those by Nigerian resources relative to total work volume.
(d) Tenderer shall comply with the latest approved version of NCDMB HCD guideline by committing (via a letter of undertaking) to providing Project-Specific training, man-hour, budget, skill development and understudy plan for Nigerian personnel utilizing OGTAN registered trainer(s) or other approved NCDMB training institution(s).
(e) Tenderer shall provide Location of in-country facilities (not limited to administrative office) to execute the work scope
Tenderer’s failure to comply with the NOGICD Act or demonstrate commitment to Nigerian Content development will result in Tenderer’s disqualification.
(5) CLOSING DATE
Only tenderers who are registered and have LIVE status in the 1.01.06 (Fishing and Repair Tools) and 3.04.36 (Drilling Services) categories in NipeX Joint Qualification Scheme (NJQS) database as at 1600 hours on 23 Dec 2022 being the advert closing date shall be invited to submit Technical Bids.
(6) ADDITIONAL INFORMATION
(a) Interested suppliers must be prequalified for this product/service category in NJQS
(b) Full tendering procedure will be provided only to contractors that have been successfully prequalified in NJQS
(c) This advertisement shall neither be construed as an Invitation to Tender (ITT) nor a commitment on the part of MPN to award a contract to any supplier and/or associated companies, sub-contractors or agents
(d) This advertisement shall not entitle prequalified companies to make any claims whatsoever, and/or seek any indemnity from MPN and/or its partners by virtue of such companies having been prequalified in NJQS
(e) All costs incurred in registering and prequalifying for this and other product/service categories in NJQS shall be borne solely by suppliers
(f) Suppliers that are prequalified for this product/service category in NJQS must ensure that their names and contact details (physical address, email address and telephone number) of their company and authorized/responsible personnel is up-to-date in their company profile in the NJQS database
(g) MPN shall communicate only with the authorized/responsible personnel of prequalified companies and not through unauthorized individuals or agents.
NCDMB CERTIFICATION: ES/NCDMB/MPN/ADV/UPD/271122/ PROVISION OF FISHING AND TOOLS RENTAL SERVICES
Mobil House,
Lekki Expressway,
Victoria island,
P.M.B 12054,
Lagos Nigeria
