Metallurgical Training Institute, Onitsha, Anambra State - Expression Of Interest/Invitation To Tender For 2020 Capital, Constituency And Zonal Intervention Projects (9 Lots)

MINISTRY OF MINES AND STEEL DEVELOPMENT METALLURGICAL TRAINING INSTITUTE KM 6/7, ONITSHA/OWERRI ROAD, P.M.B 1555, ONITSHA EXPRESSION OF INTEREST/INVITATION TO TENDER FOR 2020 CAPITAL, CONSTITUENCY AND ZONAL INTERVENTION PROJECTS

A. INTRODUCTION The Metallurgical Training Institute, Onitsha is a Federal Government Owned Institute with the mandate to train Low/Middle-Level Technical Manpower in Maintenance and Repair works for the Steel and Allied Industries in Nigeria. In compliance with the Public Procurement Act, 2007, the Institute hereby invites reputable and qualified companies to tender for Construction, Procurement and Consultancy services of the following Projects:

B. SCOPE OF WORKS, GOODS & SERVICES CAPITAL PROJECTS

CATEGORY A: WORKS

LOT NO DESCRIPTION LOT 1 Rehabilitation of Erosion – Ravaged Internal Road, Phase II (Road from road H – End to main borehole site/Exit gate and Road from the main gate house to Heavy Mobile Equipment workshop) LOT 2 Reconstruction of the Institute Main Gate and Perimeter Masonry Fencing and the Institutes front View Landscaping

CATEGORY B: GOODS

LOT NO DESCRIPTION LOT 3 Procurement of 1 No Staff Bus and 1 No Project Utility Vehicle LOT 4 Purchase of Laboratory and Science Equipment Apparatus LOT 5 Procurement and Installation of Classroom Tables and Chairs LOT 6 Supply and Installation of Computers in Higher Institutions in Anambra North Senatorial District, Anambra State

CATEGORY C: SERVICES

LOT NO DESCRIPTION LOT 7 Training of Unemployed Persons/Entrepreneurs on Machine Fabrication In Anambra North Senatorial District, Anambra State LOT 8 Training on Construction and Rehabilitation of Homes using Local Materials in Ayamelum, Okpoko, Iowa DAS, Anambra State

CONSTITUENCY AND ZONAL INTERVENTION PROJECTS CATEGORY C: SERVICES LOT NO LOT 9 DESCRIPTION

LOT NO DESCRIPTION LOT 9 Training of Youths Data coding in Anambra State SDRR

C. ELIGIBILITY REQUIREMENTS a. Evidence of Certificate of Incorporation issued by Corporate Affairs Commission (CAC) including Forms CAC2 and CAC7; b. Evidence of Company’s Income Tax Clearance Certificate for the last three (3) years (2017/2018/2019) valid till 31 December, 2020 whose declared Annual turnover correspond with those in Audited Accounts c. Evidence of current Pension Compliance Certificate valid till 31″ December 2020 d. Evidence of current Industrial Training Fund (ITF) Compliance Certificate valid till 31st December 2020. e. Evidence of current Nigeria Social Insurance Trust Fund (NSITF) Compliance Certificate valid till 31 December 2020 f. Evidence of Registration on the National Database of Federal Contractors, Consultants, and Service Providers by submission of Interim Registration Report (IRR) expiring on 31/12/2020 or valid Certificate issued by Bureau of Public Procurement g. Sworn Affidavit disclosing – That the company is not in receivership, insolvent or bankrupt – That the company does not have any Director who has ever been convicted in any court of law in Nigeria or any other country for criminal offence in relation to fraud or financial impropriety. – Whether or not any Officer of the relevant Committees of the Metallurgical Training Institute, Onitsha or the Bureau of Public Procurement is a former or present Director, Shareholder or has any pecuniary interest in the bidder and to confirm that all information presented in its bid are true and correct in all particulars h. Evidence of Company’s Audited Account for the last three (3) years – (2017/2018/2019); i. Evidence of Financial Capacity to execute the project by submission of Reference letter from a reputable bank indicating willingness to provide credit facility for the execution of the project. j. Detailed Company’s Profile to include the Names, Phone number, Curriculum Vitae and credentials of Technical and Professional Staff to be deployed for the project and copies of their Academics/Professional qualification such as COREN, QSRBN, ARCON, CORBON etc (for category A) k. Category C: Evidence of registration with relevant professional body(ies); l. Verifiable documentary evidence of at least (3) similar jobs executed in the last five (5) years including Letter of Awards, Valuation Certificates and job Completion Certificate and photograph of the projects. m. List of Plants/Equipment with Proof of Ownership/Lease (where applicable) n. Only companies included in the National Automotive Design and Development Council’s approved list of local manufacturers of vehicles or their authorised representatives should bid for the vehicles; o. For Supply of Equipment: Letter of Authorization as representative of the Original Equipment Manufacturers (OEMs) p. All documents for submission must be transmitted with a Covering /Forwarding letter under the Company’s Letter Head Paper bearing amongst others, the Registration Number (RC) as issued by the CAC, Contact Address, Telephone Number (preferably GSM No) and e-mail address. The Letter head Paper must bear the Names and Nationalities of the Directors of the Company at the bottom of the page, duly signed by the authorized officer of the Firm.

D. COLLECTION OF TENDER DOCUMENTS (CATEGORY A & B) Interested and competent Bidders should collect the Standard Bidding Document (for Goods & Works) from PROCUREMENT DEPARTMENT, ROOM 6, Metallurgical Training Institute, Onitsha on evidence of payment of N10,000.00 per Lot non-refundable deposit from Monday to Friday, between 9am – 3:00pm respectively by using Central Bank of Nigeria (CBN) payment gateway platform that can be accessed from the REMITA Website. Please note that bidders for consultancy services will not collect tender document at this stage until after pre-qualification.

E. SUBMISSION OF TENDER DOCUMENTS (CATEGORY A&B) Completed tender document should be three (3) hard copies each (Marked Original & Copies) for both Technical & Financial Bids of each lot which should be in two separate sealed envelope clearly marked at the top right corner of each envelope stating the title of the projectile. TECHNICAL BIDS FOR LOT 1 & “FINANCIAL BIDS FOR LOT 1” and at the reserve side the name of the company should be boldly written. Both envelopes shall then be put in a larger envelope dearly marked at the top right comer stating the title of the project and addressed to the Director Chief Executive, Metallurgical Training Institute, km 6/7 Onitsha – Owerri Road, Onitsha and deposited in the box provided at the Procurement Department of the Institute, Room 6 not later than 12:00 noon on Monday, 17 August, 2020. Late application will be returned unopened. Please make sure you sign Bid submission Register at Procurement office.

F. EXPRESSION OF INTEREST LOT (CATEGORY C) All EoI ( 1 ORIGINAL AND 2 DUPLICATE) neatly packaged in a sealed envelope, stating Expression of Interest, shall be submitted on or before the dosing date of Monday, 20 July, 2020 at 12.00pm at the PROCUREMENT DEPARTMENT, ROOM 6. Submission on the above stated last day should be done before 12pm. All EOI shall be opened immediately after the bid dosing time of 12.00noon of Monday 20 July, 2020.

G. OPENING OF TECHNICAL BIDS AND EOI DOCUMENTS: Opening of technical bids will be in the Institute’s Board Room at 12:00 noon Monday, 17 August, 2020 in the presence of relevant Professional Bodies and Civil Society Organizations. The above listed organizations are hereby invited to witness the public opening. Only pre-qualified bidders will be invited at a later date for financial bid opening while financial bids of unsuccessful bidders will be returned unopened. EOI will be opened immediately after the deadline for submission at 12.00noon of Monday 20 July, 2020. at the Institute Board Room, Km 6/7, Onitsha /Owerri Road, Onitsha, in the presence of relevant Professional Bodies and Civil Society Organizations. Qualified companies will be invited at a later date for collection of Request for Proposals. Late submission will be returned unopened.

H. GENERAL INFORMATION a. Bids must be in English Language and signed by an official authorised by the bidder b. Bids submitted after the deadline for submission would be rebuked unopened c. Bidders should not bid for more than two (2) Lots d. Bid documents can also be collected in Soft copies and Bidders can submit through Post (Courier Services); e. All cost will be borne by the bidders f. Metallurgical Training Institute, Onitsha reserved the right to verify claims made in the returned tender documents g. Category A & B: Only pre-qualified bidders at technical evaluation will be contacted at a later date for financial bids opening, while financial bids of un-successful bidders will be returned unopened; h. Category C: Only shortlisted firms will be invited at a later date for collection of Request for Proposals; i. The Metallurgical Training Institute is not bound to pre-qualify any bidders and reserves the right to annul the Procurement Process at any time without incurring any liabilities in accordance with section 28 of the Public Procurement Act 2007

Signed: Director/Chief Executive Metallurgical Training Institute, Onitsha.

Metallurgical Training Institute, Onitsha, Anambra State – Expression Of Interest/Invitation To Tender For 2020 Capital, Constituency And Zonal Intervention Projects (9 Lots)

POPULAR

Check List of NGO/Governments Tenders with May 2022 Deadlines

How to Check for your Individual TIN (Tax Identification Number) Online

Bureau Of Public Enterprises (BPE)- Invitation For Expression Of Interest (EOI) For The Provision Of Facility Management Services And Provision Of Corporate Security Services (2 Lots)

How to Check Your Ikeja Electric (IKEDC) E-bills Online

Federal Ministry Of Education- Invitation For Tender/Expression Of Interest (EOI) For Goods, Works And Services For Execution Of 2022 Appropriation (34 Lots)

Welcome Back!

Create New Account!

Retrieve your password